Premium Information is available for this item - Upgrade for $1 a day
3040-01-307-6147
Shouldered Shaft
3040013076147 013076147 520-4498555 PC 97-36-429 505-4457354 ITEM 43 505-4457354
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
4
Marketplace 3040-01-307-6147
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-307-6147 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-307-6147 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 3040-01-307-6147 RQST NE Updated Every Day 3040-01-307-6147 RQST
/fsg-31/fsc-3120/us
a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 505-4457354
Shouldered Shaft 3040013076147 013076147 different for $1 a day Upgrade your Account Upgrade 3120
Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 505-4457354
/www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-285-9961 Sleeve Bushing 3120012859961012859961 505-4457354
Documents 5365-01-677-5172 2+ Documents ( More... https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-307-6147
Shouldered Shaft 3040013076147 013076147 9961Sleeve Bushing3120012859961 012859961 505-4457354
12873 A gear in the form of a frustum of a cone https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-307-6147
Shouldered Shaft 3040013076147 013076147 9961Sleeve Bushing3120012859961 012859961 505-4457354
Restrictions 3040-01-307-6147
3040-01-307-6147 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-307-6147
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-307-6147
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHD
Approved Sources 3040-01-307-6147
- Part Number
- Manufacturer
- Status
- 505-4457354 ITEM 43
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
- 520-4498555 PC
- 43689 - Huntington Ingalls Inc (Active)
- Advisory Reference
- Advisory Reference
- 97-36-429
- 43689 - Huntington Ingalls Inc (Active)
- Advisory Reference
- Advisory Reference
- 505-4457354
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-307-6147
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7500 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.6100 Inches Nominal
- First End Groove Width [AAHG]
- 0.1250 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 1.4060 Inches Nominal
- First End External Thread Length [AMEA]
- 1.4060 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved And Externally Threaded
- Material Document And Classification [MDCL]
- Qq-N-286,Cl A Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 1.500 Inches Nominal
- Second End Diameter [AMFZ]
- 0.9950 Inches Nominal
- Second End Spline Length [AMGA]
- 1.251 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 0.9950 Inches Nominal
- Second End Spline Minor Diameter [AMGB]
- 0.8440 Inches Minimum And 0.8540 Inches Maximum
- Second End Spline Quantity [BDSR]
- 10
- Second End Style [AAHP]
- Cross Drilled Hole And Splined (Straight)
- Second End Hole Diameter [AMGS]
- 0.2810 Inches Nominal
- Overall Length [ABHP]
- 11.562 Inches Nominal
- Step Quantity [ATPC]
- 5
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-307-6147
DLA Procurement Analysis 3040-01-307-6147
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-307-6147
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-307-6147
Freight Information 3040-01-307-6147
3040-01-307-6147 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-307-6147 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-307-6147 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-307-6147 is not classified as a special type of cargo when transported by water. 3040-01-307-6147 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-307-6147
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension over 2", but less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 13.0" H x 4.0" W x 4.0" L
- --
- --
- --
- Any Suitable Process
- 13.0" H x 4.0" W x 4.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-307-6147 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: