Premium Information is available for this item - Upgrade for $1 a day
3040-01-306-9271
Shouldered Shaft
3040013069271 013069271 22286
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-306-9271
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-306-9271 5+ Documents (More...)
... 22286 CASE 5 EA NS Request Quotation Subscribe to View Vendor Details... 22286 CASE 1476 EA NS Request
Quotation 22286 CASE 1476 EA NS Request Quotation Updated Every Day 6645-00-449-2649 RQST NE Updated
(CAGE Code 27646) DAC: 5 1 Sep 1989 3040-01-306-9271 Shouldered Shaft 22286RNCC: 3 | RNVC: 2 | DAC: 5
SLEEVE,SHAFT,PUMP 320 EA NS Request Quotation Subscribe to View Vendor Details... 22286 SLEEVE,SHAFT
... 22286 CASE 5 EA NS Request Quotation Subscribe to View Vendor Details... 22286 CASE 1476 EA NS Request
22286 CASE 5 EA NS Request Quotation Subscribe to View Vendor Details... 22286 CASE 1476 EA NS Request
https//www.nsnlookup.com /cage Davis And Wilder Inc (CAGE Code 22286) Santa Clara 6. 22286 Davis And
Restrictions 3040-01-306-9271
3040-01-306-9271 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-306-9271
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-306-9271
- National Security Agency (DGX1)
- Effective Date:
- 1 Feb 2013
Approved Sources 3040-01-306-9271
- Part Number
- Manufacturer
- Status
- 22286
- Manufacturer
- 27646 - Warn Industries, Inc. (Active)
- Primary Buy
- Primary Buy
- 22286
- 27647 - Warn Industries Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-306-9271
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- 3930-01-275-6420
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.0000 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.9400 Inches Nominal
- First End Groove Width [AAHG]
- 0.0600 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.100 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved
- Material [MATT]
- Steel Comp 4130
- Largest Step Diameter [CSPY]
- 1.125 Inches Nominal
- Second End Diameter [AMFZ]
- 1.1170 Inches Minimum And 1.1250 Inches Maximum
- Second End Pitch Diameter [AMGF]
- 1.0833 Inches Nominal
- Second End Pressure Angle [AMGE]
- 30.0 Degrees Nominal
- Second End Spline Length [AMGA]
- 0.800 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 1.1170 Inches Minimum And 1.1250 Inches Maximum
- Second End Spline Minor Diameter [AMGB]
- 1.0138 Inches Minimum And 1.0171 Inches Maximum
- Second End Spline Quantity [BDSR]
- 26
- Second End Style [AAHP]
- Splined (Involute)
- Overall Length [ABHP]
- 3.800 Inches Nominal
- Special Features [FEAT]
- First End Has Internal Hexagon Flats
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 32.0 Microinches
DLA Procurement Analysis 3040-01-306-9271
Management Data 3040-01-306-9271
NATO Stock Numbers Related to 3040-01-306-9271
Freight Information 3040-01-306-9271
3040-01-306-9271 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-306-9271 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-306-9271 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-306-9271 is not classified as a special type of cargo when transported by water. 3040-01-306-9271 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-306-9271 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: