Premium Information is available for this item - Upgrade for $1 a day
3040-01-305-9968
Remote Control Lever
3040013059968 013059968 12358381-2 12358381
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL. View more Remote Control Lever
May 2023
4
Marketplace 3040-01-305-9968
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-305-9968 2+ Documents (More...)
United States (US) 4. 3040-01-305-9968 Marketplace Restrictions Approved Sources Datasheet Management
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 12358381
-1 12358381 A rigid item usually in the form of an arm of various shapes and cross sections, containing
Remote Control Lever 3040013059968 013059968 $1 a day Upgrade your Account Upgrade 3040-01-305-
Restrictions 3040-01-305-9968
3040-01-305-9968 is a Remote Control Lever that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-305-9968
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZBD
- Spain (YB01)
- Effective Date:
- 1 Aug 2006
Approved Sources 3040-01-305-9968
- Part Number
- Manufacturer
- Status
- 12358381-2
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 12358381
- 19207 - U S Army Tank Automotive Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-305-9968
- Characteristic
- Specifications
- FIIG
- Specifications
- A524P0
- End Item Identification [AGAV]
- 1450-01-207-6408
- Bore Type [ASBP]
- Splined
- Center To Center Distance Between Link And Shaft Holes [BFGW]
- 2.000 Inches Nominal
- Minor Diameter [AGJR]
- 0.942 Inches Minimum And 0.947 Inches Maximum
- Material [MATT]
- Steel
- Link End Hole Diameter [BFHA]
- 0.593 Inches Minimum And 0.594 Inches Maximum
- Link End Thickness [BFGY]
- 0.625 Inches Nominal
- Major Diameter [AAZR]
- 1.128 Inches Nominal
- Shaft End Thickness [BFGX]
- 0.693 Inches Minimum And 0.713 Inches Maximum
- Shaft Securing Method [CZLP]
- Spline
- Overall Width [ABMK]
- 1.750 Inches Nominal
- Special Features [FEAT]
- Bearing Set Inside Link Hole; Offset Height: 0.287 In. Minimum And 0.307 In. Maximum
- Spline Quantity [ABSA]
- 15
- Style Designator [STYL]
- Offset, One Hole Link End
- Surface Treatment [SFTT]
- Cadmium
Weapon Systems (WSDC) 3040-01-305-9968
DLA Procurement Analysis 3040-01-305-9968
- Last Stock Position:
- 7 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-305-9968
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3040-01-305-9968
Freight Information 3040-01-305-9968
3040-01-305-9968 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-01-305-9968 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-01-305-9968 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-305-9968 is not classified as a special type of cargo when transported by water. 3040-01-305-9968 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-305-9968
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb to 5lb, all dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 4.0" H x 2.0" W x 1.0" L
- --
- --
- Physical Protection
- Any Suitable Process
- 4.0" H x 2.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- 1/4 inch thick
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-305-9968 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: