Premium Information is available for this item - Upgrade for $1 a day
3040-01-305-2146
Shouldered Shaft
3040013052146 013052146 63982DX
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
6
Marketplace 3040-01-305-2146
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-305-2146 2+ Documents (More...)
RQST NE Updated Every Day 3040-01-305-2146 RQST Updated Every Day 3040-01-305-2146 RQST NE Related
Documents 3040-01-305-2146 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040
Shouldered Shaft 3040013052146 013052146 Not IdenticalSecond End Style [AAHP]PlainStep Quantity
Restrictions 3040-01-305-2146
3040-01-305-2146 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-305-2146
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-305-2146
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
Approved Sources 3040-01-305-2146
- Part Number
- Manufacturer
- Status
- 63982DX
- Manufacturer
- 45152 - Oshkosh Corp (Active)
- Original Design
- Original Design
- 63982DX
- 75Q65 - Oshkosh Defense Llc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 3040-01-305-2146
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- First End Style [AAGZ]
- Splined (Straight)
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Plain
- Step Quantity [ATPC]
- 4
- End Item Identification [AGAV]
- 2320-01-025-3733
Similar Supply Items to 3040-01-305-2146
Freight Information 3040-01-305-2146
3040-01-305-2146 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 129920. A Sub NMFC of X. It has a NMFC Description of SHAFTS/SHAFTING,FLEX NOI STL. 3040-01-305-2146 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-305-2146 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-305-2146 is not classified as a special type of cargo when transported by water. 3040-01-305-2146 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-305-2146
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --