Premium Information is available for this item - Upgrade for $1 a day
3040-01-302-8376
Manual Control Lever
3040013028376 013028376 863T0960340-020 628383
A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK. View more Manual Control Lever
November 2023
3
Marketplace 3040-01-302-8376
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-302-8376 5+ Documents (More...)
United States (US) 4. 3040-01-302-8376 Marketplace Restrictions Approved Sources Datasheet Management
NE FedMall Updated Every Day 3040-01-302-8376 RQST NE Updated Every Day 3040-01-302-8376 RQST Updated
Manual Control Lever 3040013028376 013028376 your Account Upgrade 3040-01-302-8376Manual Control
Lever3040013028376 013028376 863T0960340-020 628383 2520331554864 331554864,628383 browser . 2520-33
-0002 628383-2 An externally threaded fastener whose threaded portion is of one nominal diameter, No
. -2 BOLT,INTERNAL WRENCHING 100 EA NS Request Quotation Subscribe to View Vendor Details... 628383-2
-0003 628383-3 An externally threaded fastener whose threaded portion is of one nominal diameter, No.
-3 BOLT,INTERNAL WRENCHING 10 EA NS Request Quotation Subscribe to View Vendor Details... 628383-3 BOLT
-0002 628383-2 An externally threaded fastener whose threaded portion is of one nominal diameter, No.
-2 BOLT,INTERNAL WRENCHING 100 EA NS Request Quotation Subscribe to View Vendor Details... 628383-2 BOLT
Restrictions 3040-01-302-8376
3040-01-302-8376 is a Manual Control Lever that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-302-8376
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-302-8376
- US Air Force (FUGC)
- Effective Date:
- 1 Nov 2006
- Former MOE Rule:
- FUU5
Approved Sources 3040-01-302-8376
- Part Number
- Manufacturer
- Status
- 863T0960340-020
- Manufacturer
- 04236 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
- 628383
- 80045 - L3harris Cincinnati Electronics (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-302-8376
- Characteristic
- Specifications
- FIIG
- Specifications
- A524V0
- End Item Identification [AGAV]
- Peacekeeper T&H
- Special Features [FEAT]
- Lever 8.500 In. Lg;0.620 In. Wide;0.190 In. Thk; First End Has Hole 0.255 In. Dia; Second End Is Flat,And Offset 0.630 In.
Weapon Systems (WSDC) 3040-01-302-8376
DLA Procurement Analysis 3040-01-302-8376
- Last Stock Position:
- 7 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-302-8376
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AI
- ADVANCED INTERCONTINENTAL BALLISTIC (MX)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-01-302-8376
Freight Information 3040-01-302-8376
3040-01-302-8376 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 3040-01-302-8376 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 3040-01-302-8376 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 3040-01-302-8376 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 3040-01-302-8376 is not classified as a special type of cargo when transported by water. 3040-01-302-8376 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-302-8376 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: