Premium Information is available for this item - Upgrade for $1 a day
3040-01-302-5274
Shouldered Shaft
3040013025274 013025274 518-4674753 ITEM 19 4674753-0019 4674753-0019L1 518-4674753 ITEM 19L1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
5
Marketplace 3040-01-302-5274
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-302-5274 2+ Documents (More...)
RQST NE Updated Every Day 3040-01-302-5274 RQST Updated Every Day 3040-01-302-5274 RQST NE Related Documents
3040-01-302-5274 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-302-5274
Shouldered Shaft 3040013025274 013025274 for $1 a day Upgrade your Account Upgrade 3040-01-302-
5274Shouldered Shaft3040013025274 013025274 518-4674753 ITEM 19 4674753-0019 4674753-0019L1 518-4674753
Restrictions 3040-01-302-5274
IUID Required
3040-01-302-5274 is a Shouldered Shaft that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-302-5274
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-302-5274
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Collaborators:
- JB
- Supplementary Receivers:
- GG
Approved Sources 3040-01-302-5274
- Part Number
- Manufacturer
- Status
- 518-4674753 ITEM 19
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Incomplete Reference
- Incomplete Reference
- 4674753-0019
- 96169 - Electric Boat Corporation (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 4674753-0019L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
- 518-4674753 ITEM 19L1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-302-5274
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Criticality Code Justification [CRTL]
- Zzzy
- End Item Identification [AGAV]
- Steering/Diving Gear
- End Similarity [AAHN]
- Identical
- Material Document And Classification [MDCL]
- Qq-N-288,Cl A Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 6.500 Inches Minimum And 6.530 Inches Maximum
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control In Accordance With Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
- Overall Length [ABHP]
- 262.880 Inches Nominal
- Step Quantity [ATPC]
- 4
Management Data 3040-01-302-5274
Navy
- Cognizance:
- 3H
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-302-5274
Freight Information 3040-01-302-5274
3040-01-302-5274 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-302-5274 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-302-5274 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-302-5274 is not classified as a special type of cargo when transported by water. 3040-01-302-5274 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-302-5274
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 275.0" H x 15.0" W x 15.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 275.0" H x 15.0" W x 15.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- Wood Blocking and Bracing, Fasteners, or Steel Strapping, for Tie-down purposes. Rubber tired wheels shall be blocked clear of the floor of the crate or skid and shall not be load bearing
- Not Applicable
- MIL-C-104, Wood Crate, Lumber or Plywood Sheathed, Nailed or Bolted
- Open for inspection or use only
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement