Premium Information is available for this item - Upgrade for $1 a day
3040-01-288-9689
Shouldered Shaft
3040012889689 012889689 310B643H01 904J298 PIECE 16 904J298
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
7
Marketplace 3040-01-288-9689
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-288-9689 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-288-9689 RQST NE Updated Every Day 3040-01-288-9689 RQST
RQST NE Updated Every Day 3040-01-288-9689 RQST RQST NE Updated Every Day 3040-01-288-9689 RQST
https//www.nsnlookup.com /fsg-61/fsc-6125/us 6125-01-285-1941 Motor-Generator Stator 6125012851941 904J298
Shouldered Shaft 3040012889689 012889689 Updated Every Day 3040-01-288-9689 RQST NE Related https
/fsg-61/fsc-6125/us
www.nsnlookup.com /fsg-61/fsc-6125/us 6125-01-291-0952 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-288-9689
Shouldered Shaft 3040012889689 012889689 Documents 3040-01-288-9689 3+ Documents ( More... https
X | HMIC : P | PMIC : A | EDC: | ADPEC : 0 5330 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-288-9689
Shouldered Shaft 3040012889689 012889689 Obsolete) Original Design RNCC 3 RNVC 9 DAC 5 904J298
/fsg-31/fsc-3120/us
3120-01-288-9035 2+ Documents ( More... ) https https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-288-9689
Shouldered Shaft 3040012889689 012889689 Identification [AGAV]Motor Generator,904J298 https https
Restrictions 3040-01-288-9689
3040-01-288-9689 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-288-9689
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-288-9689
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-288-9689
- Part Number
- Manufacturer
- Status
- 310B643H01
- Manufacturer
- 11660 - Westinghouse Electric Corp (Obsolete)
- Original Design
- Original Design
- 904J298 PIECE 16
- 79500 - Westinghouse Electric Corp (Active)
- Secondary Buy
- Secondary Buy
- 904J298 PIECE 16
- 11660 - Westinghouse Electric Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 904J298
- 79500 - Westinghouse Electric Corp (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-288-9689
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Qq-S-633 Fed Spec Single Material Response
- First End Style [AAGZ]
- Externally Threaded And Flat Keyway
- First End Keyway Width [AMCZ]
- 0.1875 Inches Nominal
- First End External Keyway Length [AMDE]
- 0.750 Inches Nominal
- First End Keyway Depth [AMDG]
- 0.0937 Inches Nominal
- First End Diameter [AMDL]
- 1.1730 Inches Nominal
- First End External Thread Length [AMEA]
- 0.375 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Externally Threaded And Flat Keyway
- Second End Keyway Width [AMFR]
- 0.3125 Inches Nominal
- Second End External Keyway Length [AMFS]
- 0.875 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.0937 Inches Nominal
- Second End Diameter [AMFZ]
- 1.5625 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.750 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.250 Inches Nominal
- Overall Length [ABHP]
- 30.8125 Inches Nominal
- Step Quantity [ATPC]
- 9
DLA Procurement Analysis 3040-01-288-9689
Management Data 3040-01-288-9689
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-288-9689
Freight Information 3040-01-288-9689
3040-01-288-9689 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-288-9689 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-288-9689 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-288-9689 is not classified as a special type of cargo when transported by water. 3040-01-288-9689 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-288-9689 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: