Premium Information is available for this item - Upgrade for $1 a day
3040-01-288-1615
Shouldered Shaft
3040012881615 012881615 NF203054-1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
6
Marketplace 3040-01-288-1615
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-288-1615 1+ Documents (More...)
Every Day 3040-01-288-1615 RQST NE Related Documents 3040-01-288-1615 1+ Documents ( More... ) https
//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-288-1615 Shouldered Shaft 3040012881615012881615 NF203054
Restrictions 3040-01-288-1615
3040-01-288-1615 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-288-1615
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-288-1615
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-01-288-1615
- Part Number
- Manufacturer
- Status
- NF203054-1
- Manufacturer
- 78567 - Speco Corp (Obsolete)
- Original Design
- Original Design
Datasheet 3040-01-288-1615
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.2030 Inches Minimum And 0.2080 Inches Maximum
- First End Spline Quantity [BDSQ]
- 9
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Length [AMDM]
- 0.8100 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.2080 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 0.1875 Inches Nominal
- Material [MATT]
- Steel Comp 4340
- Largest Step Diameter [CSPY]
- 0.3126 Inches Nominal
- Material Document And Classification [MDCL]
- Ams6415 Assn Std Single Material Response
- Second End Diameter [AMFZ]
- 0.3125 Inches Minimum And 0.3128 Inches Maximum
- Second End Style [AAHP]
- Plain
- Special Features [FEAT]
- 2Nd Step Length: 0.940 In.
- Overall Length [ABHP]
- 2.370 Inches Nominal
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 63.0 Microinches
DLA Procurement Analysis 3040-01-288-1615
Management Data 3040-01-288-1615
Similar Supply Items to 3040-01-288-1615
Freight Information 3040-01-288-1615
3040-01-288-1615 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-288-1615 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-288-1615 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-288-1615 is not classified as a special type of cargo when transported by water. 3040-01-288-1615 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-288-1615 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: