Premium Information is available for this item - Upgrade for $1 a day
3040-01-286-8655
Shouldered Shaft
3040012868655 012868655 5006578
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-286-8655
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-286-8655 2+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-286-8655 RQST NE Updated Every Day 3040-01-286-8655 RQST
Updated Every Day 3040-01-286-8655 RQST NE Related Documents 3040-01-286-8655 2+ Documents ( More...
/www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-444-0696 Helical Compression Spring Seat 014440696 5006578
Shouldered Shaft 3040012868655 012868655 for $1 a day Upgrade your Account Upgrade 3040-01-286-
Restrictions 3040-01-286-8655
3040-01-286-8655 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-286-8655
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-286-8655
- US Army (A920)
- Effective Date:
- 1 Aug 2009
- Former MOE Rule:
- A403
- Supplementary Receivers:
- BFCN
Approved Sources 3040-01-286-8655
- Part Number
- Manufacturer
- Status
- 5006578
- Manufacturer
- 54490 - Dept Of The Army (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-286-8655
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.5000 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.2300 Inches Nominal
- First End Groove Width [AAHG]
- 0.0400 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.437 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved And Slotted
- First End Slot Depth [AMDW]
- 0.396 Inches Nominal
- First End Slot Width [AKTM]
- 0.188 Inches Nominal
- Material [MATT]
- Steel Comp 303
- Largest Step Diameter [CSPY]
- 0.500 Inches Nominal
- Material Document And Classification [MDCL]
- Astm-A582,Cond A National Spec All Material Responses
- Second End Distance From End To Groove [AMFQ]
- 0.599 Inches Nominal
- Second End Diameter [AMFZ]
- 0.2497 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved And Flatted
- Second End Flat Depth [AMFN]
- 0.0497 Inches Nominal
- Second End Flat Length [AMFP]
- 0.312 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.2300 Inches Nominal
- Second End Groove Width [AAHW]
- 0.0290 Inches Nominal
- Overall Length [ABHP]
- 1.500 Inches Nominal
- Special Features [FEAT]
- First End Has A 0.066 In. Wide And 0.268 In. Length Thru Slot;Finish:Passivate Per Qq-P-35,Type 4
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-01-286-8655
Management Data 3040-01-286-8655
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- JH
- Tanks
Tank, 105mm, M60A3, TTS
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-01-286-8655
Freight Information 3040-01-286-8655
3040-01-286-8655 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-286-8655 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-286-8655 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-286-8655 is not classified as a special type of cargo when transported by water. 3040-01-286-8655 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-286-8655 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: