Premium Information is available for this item - Upgrade for $1 a day
3040-01-282-8534
Shouldered Shaft
3040012828534 012828534 CB57-43303-1 CB57-42185 ITEM 8 CB57-43303
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
4
Marketplace 3040-01-282-8534
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-282-8534 5+ Documents (More...)
CB57-43303-1 SHAFT 1 EA NS Request Quotation FedMall Updated Every 15 Minutes 3040-01-282-8534 BUY NE
/fsg-30/fsc-3040/us 3040-01-282-8534 Shouldered Shaft 3040012828534012828534 CB57-43303-1CB57-42185
Shouldered Shaft 3040012828534 012828534 $1 a day Upgrade your Account Upgrade 3040-01-282-8534Shouldered
Shaft3040012828534 012828534 CB57-43303 -1 CB57-42185 ITEM 8 CB57-43303 A shaft having two or more different
Shaft3040012828534 012828534 CB57-43303 -1 CB57-42185 ITEM 8 CB57-43303 A shaft having two or more different
diameters (greater than 0.031 inches CB57-43303-1 SHAFT 1 EA NS Request Quotation FedMall Updated Every
Shaft3040012828534 012828534 CB57-43303 -1 CB57-42185 ITEM 8 CB57-43303 A shaft having two or more different
diameters (greater than 0.031 inches CB57-43303-1 SHAFT 1 EA NS Request Quotation FedMall Updated Every
Shouldered Shaft 3040012828534 012828534 $1 a day Upgrade your Account Upgrade 3040-01-282-8534Shouldered
Shaft3040012828534 012828534 CB57-43303 -1 CB57-42185 ITEM 8 CB57-43303 A shaft having two or more different
Restrictions 3040-01-282-8534
3040-01-282-8534 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-282-8534
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-282-8534
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-282-8534
- Part Number
- Manufacturer
- Status
- CB57-43303-1
- Manufacturer
- 97384 - Textron Systems Corporation (Active)
- Original Design
- Original Design
- CB57-42185 ITEM 8
- 97384 - Textron Systems Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CB57-43303
- 97384 - Textron Systems Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-282-8534
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.1250 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 0.8125 Inches Nominal
- First End Spline Quantity [BDSQ]
- 15
- First End Style [AAGZ]
- Splined (Involute)
- First End Pitch Diameter [AMDS]
- 0.9375 Inches Nominal
- First End Pressure Angle [AMDR]
- 30.0 Degrees Nominal
- First End Spline Length [AMDM]
- 1.500 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 1.0000 Inches Nominal
- Material [MATT]
- Steel Comp 1042
- Largest Step Diameter [CSPY]
- 1.125 Inches Nominal
- Material Document And Classification [MDCL]
- Aisi 1042 Assn Std Single Material Response
- Second End Distance From End To Groove [AMFQ]
- 0.109 Inches Nominal
- Second End External Keyway Length [AMFS]
- 1.280 Inches Nominal
- Second End Diameter [AMFZ]
- 0.9842 Inches Minimum And 0.9846 Inches Maximum
- Second End Style [AAHP]
- Circular Grooved And Flat Keyway
- Second End Groove Diameter [AAHX]
- 0.9230 Inches Minimum And 0.9290 Inches Maximum
- Second End Groove Width [AAHW]
- 0.0460 Inches Minimum And 0.0490 Inches Maximum
- Second End Keyway Depth [AMFT]
- 0.101 Inches Nominal
- Second End Keyway Width [AMFR]
- 0.1870 Inches Nominal
- Overall Length [ABHP]
- 4.000 Inches Nominal
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-01-282-8534
Management Data 3040-01-282-8534
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-282-8534
Freight Information 3040-01-282-8534
3040-01-282-8534 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-282-8534 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-282-8534 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-282-8534 is not classified as a special type of cargo when transported by water. 3040-01-282-8534 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-282-8534
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- MIL-PRF-16173, Cosmoline, Grade 2, Soft Film
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- 1/4 inch thick
- MIL-DTL-117, Bag
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Container
Contracting Technical Data File (CTDF) 3040-01-282-8534 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: