Premium Information is available for this item - Upgrade for $1 a day
3040-01-281-1906
Shouldered Shaft
3040012811906 012811906 142D6243 16-PF-494 3106121
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
9
Marketplace 3040-01-281-1906
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-281-1906 1+ Documents (More...)
3040-01-281-1906 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-281-1906
RQST Updated Every Day 3040-01-281-1906 RQST NE Related Documents 3040-01-281-1906 1+ Documents
Restrictions 3040-01-281-1906
3040-01-281-1906 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-01-281-1906
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-281-1906
- Belgium (ZB01)
- Effective Date:
- 1 Nov 2006
- Republic of Korea (ZH01)
- Effective Date:
- 1 Mar 2002
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 May 2009
Approved Sources 3040-01-281-1906
- Part Number
- Manufacturer
- Status
- 142D6243
- Manufacturer
- 05606 - General Dynamics-Ots, Inc. (Active)
- Source Control
- Source Control
- 16-PF-494
- 03705 - Apex Tool Group, Llc (Active)
- Primary Buy
- Primary Buy
- 3106121
- 75665 - Lovejoy, Llc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-281-1906
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 1.0100 Inches Maximum
- First End Spline Quantity [BDSQ]
- 19
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Length [AMDM]
- 0.969 Inches Minimum And 1.031 Inches Maximum
- First End Spline Major Diameter [AMDP]
- 0.6620 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 0.5630 Inches Minimum And 0.5660 Inches Maximum
- Material [MATT]
- Steel Comp 4130 Or Steel Comp 4150
- Largest Step Diameter [CSPY]
- 1.500 Inches Maximum
- Overall Length [ABHP]
- 20.688 Inches Minimum And 22.562 Inches Maximum
- Special Features [FEAT]
- Shaft Has An Internal/External Involute Spline 20/40 Diametral Pitch 30Deg. Pressure Angle With 12 Teeth Which Is Optionally Oriented Allowing Varying Shaft End Alignments On One End; Spline Is Attached To The Shafts End Through A Universal Joint Conforming To Mil-J-6193; Class 2
- Step Quantity [ATPC]
- 4
Similar Supply Items to 3040-01-281-1906
Freight Information 3040-01-281-1906
3040-01-281-1906 has freight characteristics managed by the Netherlands.. 3040-01-281-1906 has a variance between NMFC and UFC when transported by rail and the description should be consulted.