Premium Information is available for this item - Upgrade for $1 a day
3040-01-269-1597
Shouldered Shaft
3040012691597 012691597 235712 9-904-102964
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-269-1597
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-269-1597 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-269-1597 RQST NE Updated Every Day 3040-01-269-1597 RQST
Updated Every Day 3040-01-269-1597 RQST NE Related Documents 3040-01-269-1597 5+ Documents ( More...
235712 9-904-102964 DAC 2 210/102963 K5333 - Moeller Electric Limited (Active) Secondary Buy RNCC 5
235712 9-904-102964 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-269-1597 Shouldered Shaft 3040012691597
Shaft3040012691597 012691597 235712 9-904-102964 https//www.nsnlookup.com /fsg-25/fsc-2590/tr 2590-27
235712 9-904-102964 https//www.nsnlookup.com /fsg-58/fsc-5815/us 5815-00-349-0853 Bracket 5815003490853
Shouldered Shaft 3040012691597 012691597 Upgrade your Account Upgrade 3040-01-269-1597Shouldered
Shaft3040012691597 012691597 235712 9-904-102964 https//www.nsnlookup.com /fsg-25/fsc-2590/tr 2590-27
Shouldered Shaft 3040012691597 012691597 Upgrade your Account Upgrade 3040-01-269-1597Shouldered
Shaft3040012691597 012691597 235712 9-904-102964 https//www.nsnlookup.com /fsg-25/fsc-2590/tr 2590-27
Restrictions 3040-01-269-1597
3040-01-269-1597 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-269-1597
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-269-1597
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
Approved Sources 3040-01-269-1597
- Part Number
- Manufacturer
- Status
- 235712
- Manufacturer
- 77237 - Dana Off Highway Products, Llc (Active)
- Primary Buy
- Primary Buy
- 9-904-102964
- 12361 - Grove U.S. Llc (Active)
- Secondary Buy
- Secondary Buy
- 235712
- 12603 - Clark Equipment Co (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-269-1597
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 0.273 Inches Minimum And 0.275 Inches Maximum
DLA Procurement Analysis 3040-01-269-1597
Management Data 3040-01-269-1597
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3040-01-269-1597
Freight Information 3040-01-269-1597
3040-01-269-1597 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-269-1597 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-269-1597 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-269-1597 is not classified as a special type of cargo when transported by water. 3040-01-269-1597 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-269-1597 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: