Premium Information is available for this item - Upgrade for $1 a day
3040-01-240-1047
Shouldered Shaft
3040012401047 012401047 609-1943567 PIECE 4 609-1943567
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-240-1047
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-240-1047 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-240-1047 RQST NE Updated Every Day 3040-01-240-1047 RQST
Updated Every Day 3040-01-240-1047 RQST NE Related Documents 3040-01-240-1047 5+ Documents ( More...
PIECE 6 609-1943567 PIECE 6 A deformable material which prevents the passage of matter through the joint
//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-246-7191 Gasket 5330012467191012467191 SS(N)606-609-1943567
PIECE 3 609-1943567 A gear with teeth on its outer surface in the form of helical threads.
Shouldered Shaft 3040012401047 012401047 PIECE 4 609-1943567 A shaft having two or more different
PIECE 6 609-1943567 PIECE 6 A deformable material which prevents the passage of matter through the joint
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-240-1047 Shouldered Shaft 3040012401047 012401047
PC 2 SS N 606-609-1943567 A gear sector with complements of worm wheel teeth.
PC 2SS N 606-609-1943567 A gear sector with complements of worm wheel teeth.
Restrictions 3040-01-240-1047
3040-01-240-1047 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-240-1047
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-240-1047
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-240-1047
- Part Number
- Manufacturer
- Status
- 609-1943567 PIECE 4
- Manufacturer
- 81316 - Portsmouth Naval Shipyard (Active)
- Primary Buy
- Primary Buy
- 609-1943567
- 81316 - Portsmouth Naval Shipyard (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-240-1047
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-281,Class A Cold Drawn Fed Spec Single Material Response
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 1.2500 Inches Nominal
- First End External Thread Length [AMEA]
- 0.5625 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 1.0000 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.1875 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.250 Inches Nominal
- Overall Length [ABHP]
- 20.250 Inches Nominal
- Step Quantity [ATPC]
- 7
DLA Procurement Analysis 3040-01-240-1047
Management Data 3040-01-240-1047
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-240-1047
Freight Information 3040-01-240-1047
3040-01-240-1047 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-240-1047 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-240-1047 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-240-1047 is not classified as a special type of cargo when transported by water. 3040-01-240-1047 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-240-1047 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: