Premium Information is available for this item - Upgrade for $1 a day
3040-01-237-6290
Shouldered Shaft
3040012376290 012376290 77832-60X9 PIECE 4 SSN637-701-2159985 PIECE 4 SSN637-701-2159985 77832-60X9
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-237-6290
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-237-6290 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-237-6290 RQST NE Updated Every Day 3040-01-237-6290 RQST
215998577832-60X9 A straight shaft having two or Shouldered Shaft 3040012376290012376290 PIECE 4 SSN637-701-2159985
/fsg-30/fsc-3040/us
PIECE 5 SSN637-701-2159985 PIECE 5 SSN637-701-2159985 77832-60X9 A straight shaft having two or
Shouldered Shaft 3040012376290 012376290 PIECE 4 SSN637-701-2159985 PIECE 4 SSN637-701-215998577832
/fsg-30/fsc-3040/us
PIECE 5 SSN637-701-215998577832-60X9 A straight shaft having two or PIECE 41 77832-60X9 PIECE
Shouldered Shaft 3040012376290 012376290 PIECE 4 SSN637-701-2159985 PIECE 4 SSN637-701-215998577832
-00-156-68383110001566838001566838 BEARING,BALL https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-237-6290
Shouldered Shaft 3040012376290 012376290 72D9W AA59629-109JABTU FF-B-171 273829-63 319696 https
PIECE 41 77832-60X9 PIECE 41 LJT45 7209W-SU 72D9W AA59629-109JABTU FF-B-171 273829-63 319696
Shouldered Shaft 3040012376290 012376290 Annular Ball Bearing 3110005543927005543927 3927Annular
Restrictions 3040-01-237-6290
3040-01-237-6290 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-237-6290
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-237-6290
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-237-6290
- Part Number
- Manufacturer
- Status
- 77832-60X9 PIECE 4
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- SSN637-701-2159985 PIECE 4
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- SSN637-701-2159985
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 77832-60X9
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-237-6290
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 4140
- Material Document And Classification [MDCL]
- Aisi 4140 Assn Std Single Material Response
- Surface Finish [CSYM]
- 32.0 Microinches
- First End Style [AAGZ]
- Splined (Straight)
- First End Diameter [AMDL]
- 1.3782 Inches Nominal
- First End Spline Length [AMDM]
- 1.000 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 1.1745 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 1.3720 Inches Nominal
- First End Spline Quantity [BDSQ]
- 10
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Splined (Straight)
- Second End Diameter [AMFZ]
- 1.3782 Inches Nominal
- Second End Spline Length [AMGA]
- 1.188 Inches Nominal
- Second End Spline Minor Diameter [AMGB]
- 1.1745 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 1.3720 Inches Nominal
- Second End Spline Quantity [BDSR]
- 10
- Largest Step Diameter [CSPY]
- 1.750 Inches Nominal
- Overall Length [ABHP]
- 6.840 Inches Nominal
- Step Quantity [ATPC]
- 3
- Special Features [FEAT]
- Drilled Hole 2Nd End 0.500 In. Dia,13Unc-2B,1.250 In. Deep
Weapon Systems (WSDC) 3040-01-237-6290
DLA Procurement Analysis 3040-01-237-6290
Management Data 3040-01-237-6290
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-237-6290
Freight Information 3040-01-237-6290
3040-01-237-6290 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-237-6290 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-237-6290 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-237-6290 is not classified as a special type of cargo when transported by water. 3040-01-237-6290 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-237-6290
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb to 5lb, all dimensions less than 24"
- Above 110G
- MIL-PRF-16173, Grade 4, Transparent Film
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 7.0" H x -- W x -- L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 7.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 4, corrosion preventive, solvent cutback, cold application, transparent, non-tacky
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- 1/4 inch thick
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-237-6290 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: