Premium Information is available for this item - Upgrade for $1 a day
3040-01-237-6254
Straight Shaft
3040012376254 012376254 77832-60X3 PIECE 27 SSN637-709-2144235 PIECE 27 SSN637-709-2144235 77832-60X3
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
2
Marketplace 3040-01-237-6254
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-237-6254 5+ Documents (More...)
/fsg-30/fsc-3040/us
BUY NE FedMall Updated Every Day 3040-01-237-6254 RQST NE Updated Every Day 3040-01-237-6254 RQST
Updated Every Day 3040-01-237-6254 RQST NE Related Documents 3040-01-237-6254 5+ Documents ( More...
PIECE 30 SSN637-709-2144235 PIECE 30 SSN637-709-214423577832-60X3 A straight shaft having two or
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-237-6254 Straight Shaft 3040012376254 012376254
PIECE 23 SSN637-709-214423577832-60X3 A straight shaft having two or PIECE 9 SSN637-709-2144235
Straight Shaft 3040012376254 012376254 PIECE 27 SSN637-709-2144235 PIECE 27 SSN637-709-214423577832
PIECE 30 SSN637-709-2144235 PIECE 30 SSN637-709-214423577832-60X3 A straight shaft having two or
PIECE 23 SSN637-709-214423577832-60X3 A straight shaft having two or PIECE 24 SSN637-709-2144235
/fsg-30/fsc-3040/us
PIECE 9 SSN637-709-2144235 PIECE 9 A tubular shaped unthreaded item with or without a flange at
3040-01-237-6387 RQST Updated Every Day 3040-01-237-6387 RQST NE Related Documents PIECE 23 SSN637-709-2144235
Restrictions 3040-01-237-6254
3040-01-237-6254 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-237-6254
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-237-6254
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-237-6254
- Part Number
- Manufacturer
- Status
- 77832-60X3 PIECE 27
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- SSN637-709-2144235 PIECE 27
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- SSN637-709-2144235
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 77832-60X3
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-237-6254
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Corrosion Resisting
- Material Document And Classification [MDCL]
- Qq-S-763,Class 304,Condition A Fed Spec Single Material Response
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- Splined (Straight)
- First End Diameter [AMDL]
- 1.3750 Inches Nominal
- First End Spline Length [AMDM]
- 1.188 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 1.1745 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 1.3750 Inches Nominal
- First End Spline Quantity [BDSQ]
- 10
- End Similarity [AAHN]
- Identical
- Overall Length [ABHP]
- 14.250 Inches Nominal
Weapon Systems (WSDC) 3040-01-237-6254
DLA Procurement Analysis 3040-01-237-6254
Management Data 3040-01-237-6254
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-237-6254
Freight Information 3040-01-237-6254
3040-01-237-6254 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-237-6254 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-237-6254 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-237-6254 is not classified as a special type of cargo when transported by water. 3040-01-237-6254 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-237-6254
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb to 5lb, all dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- 1/4 inch thick
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-237-6254 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: