Premium Information is available for this item - Upgrade for $1 a day
3040-01-232-8803
Shouldered Shaft
3040012328803 012328803 20045
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
6
Marketplace 3040-01-232-8803
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-232-8803 5+ Documents (More...)
-04-33389-20045- 990017526,3389-20045 20GB-XXX-01812 3389-20045 -20045-04 -20045-04-33389-20045 https
3389-20045-04 -20045-04-33389-20045 https -20045-04-33389-20045 20045- 990017526,3389-20045 20GB-XXX
-232-8803 Shouldered Shaft 3040012328803 012328803 related electrical https//www.nsnlookup.com /fsg-49
-33389-20045- 990017526,3389-20045 20GB-XXX-01812 3389-20045 -20045-04 -20045-04-33389-20045 https -20045
of CABLE, SPECIAL PURPOSE 3389-20045-04-3 3389-20045 to View Vendor Details... 20045 BELT ,FLAT 5 EA
NS Request Quotation 20045 BELT,FLAT 3389-20045-04-3 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040
20GB-XXX-01812 3389-20045-04 -20045 -04-33389-20045 https -20045-04-33389-20045- 990017526,3389-20045
20GB-XXX-01812 3389-20045-04 -20045 -04-33389-20045 https//www.nsnlookup.com /fsg -20045-04-33389-20045
20045- 990017526,3389-20045 20GB-XXX-01812 3389-20045 -20045-04 -20045-04-33389-20045 -20045-04-33389
33389-20045- 990017526,3389-20045 20GB-XXX-01812 3389-20045 -04 -20045-04 20045-04 -20045-04-33389-20045
Restrictions 3040-01-232-8803
3040-01-232-8803 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-232-8803
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-232-8803
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Supplementary Collaborators:
- GTKE
Approved Sources 3040-01-232-8803
- Part Number
- Manufacturer
- Status
- 20045
- Manufacturer
- 93835 - Parker-Hannifin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-232-8803
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.520 Inches Minimum And 0.525 Inches Maximum
- Material Document And Classification [MDCL]
- Ams5643 Assn Std Single Material Response
- Overall Length [ABHP]
- 4.050 Inches Nominal
- Step Quantity [ATPC]
- 7
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-232-8803
DLA Procurement Analysis 3040-01-232-8803
- Last Stock Position:
- 29 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-232-8803
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-232-8803
Freight Information 3040-01-232-8803
3040-01-232-8803 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-232-8803 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-232-8803 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-232-8803 is not classified as a special type of cargo when transported by water. 3040-01-232-8803 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-232-8803
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- --
- No special marking
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 3040-01-232-8803 8 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A522F8588
- 15 Apr 2022
- Subscribe
- 24
- Subscribe
- Subscribe
- Subscribe
- SPE4A522F8588
- 15 Apr 2022
- Subscribe
- 24
- Subscribe
- Subscribe
- Subscribe
- SPE4A518F37U7
- 19 Sep 2018
- Subscribe
- 13
- Subscribe
- Subscribe
- Subscribe
- SPE4A518F01D7
- 19 Jul 2018
- Subscribe
- 18
- Subscribe
- Subscribe
- Subscribe
- SPE4A117G00110647
- 15 Jun 2017
- Subscribe
- 12
- Subscribe
- Subscribe
- Subscribe
- SPE4A517P0597
- 17 Oct 2016
- Subscribe
- 7
- Subscribe
- Subscribe
- Subscribe
- SPE4A516M7110
- 27 Jun 2016
- Subscribe
- 4
- Subscribe
- Subscribe
- Subscribe
- SPE4A516M7112
- 27 Jun 2016
- Subscribe
- 5
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3040-01-232-8803 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: