Premium Information is available for this item - Upgrade for $1 a day
3040-01-231-7070
Shouldered Shaft
3040012317070 012317070 17187-1 17187
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
4
Marketplace 3040-01-231-7070
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-231-7070 5+ Documents (More...)
Quotation FedMall Updated Every 15 Minutes 3040-01-231-7070 BUY NE FedMall Updated Every Day 3040-01
/us 3040-01-231-7070 Shouldered Shaft 3040012317070012317070 17187-117187 A shaft having two or more
CIRCUIT CARD ASSEMBLY 9 EA NS Request Quotation Subscribe to View Vendor Details... 17187 CIRCUIT CARD
JavaScript in your web browser . 5998-14-519-9999Circuit Card Assembly5998145199999 145199999 PLBA7187 17187
CIRCUIT CARD ASSEMBLY 9 EA NS Request Quotation Subscribe to View Vendor Details... 17187 CIRCUIT CARD
Circuit Card Assembly 5998145199999145199999 Vendor Details... 17187 CIRCUIT CARD ASSEMBLY 3000 https
Request Quotation Subscribe to View Vendor Details... 17187 BOLT,MACHINE 3000 EA NS Request Quotation
CLOSER,DOOR 9 EA NS Request Quotation Subscribe to View Vendor Details... 17187 CLOSER,DOOR 8 EA NS
FORK,CONTAINER 9 EA NS Request Quotation Subscribe to View Vendor Details... 17187 FORK,CONTAINER 8
Subscribe to View Vendor Details... 17187 FORK,CONTAINER 3000 EA NS Request Quotation FedMall Updated
Restrictions 3040-01-231-7070
3040-01-231-7070 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-231-7070
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-231-7070
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-231-7070
- Part Number
- Manufacturer
- Status
- 17187-1
- Manufacturer
- 62522 - Wesco Machine Inc (Active)
- Primary Buy
- Primary Buy
- 17187-1
- 07070 - United States Department Of The Navy (Active)
- Secondary Buy
- Secondary Buy
- 17187
- 07070 - United States Department Of The Navy (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-231-7070
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 1020
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 1.3750 Inches Nominal
- End Similarity [AAHN]
- Identical
- Largest Step Diameter [CSPY]
- 2.000 Inches Nominal
- Overall Length [ABHP]
- 32.450 Inches Nominal
- Step Quantity [ATPC]
- 1
DLA Procurement Analysis 3040-01-231-7070
Management Data 3040-01-231-7070
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-231-7070
Freight Information 3040-01-231-7070
3040-01-231-7070 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-231-7070 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-231-7070 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-231-7070 is not classified as a special type of cargo when transported by water. 3040-01-231-7070 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-231-7070
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 5lb to 7.5lb, all dimensions less than 24"
- Above 110G
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-231-7070 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: