Premium Information is available for this item - Upgrade for $1 a day
3040-01-229-7588
Shouldered Shaft
3040012297588 012297588 H14474 14474
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
15
Marketplace 3040-01-229-7588
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-229-7588 5+ Documents (More...)
Quotation Updated Every Day 3040-01-229-7588 RQST NE Updated Every Day 3040-01-229-7588 RQST Updated
Every Day 3040-01-229-7588 RQST NE Related Documents 3040-01-229-7588 5+ Documents ( More... ) https
H14474 RING,REFRIGERATION RQST NS Request Quotation Updated Every Day 5365-00-115-4262 RQST NE Updated
Shouldered Shaft 3040012297588 012297588 229-7588 Shouldered Shaft 3040012297588012297588 https
-8 Y5052 - Central Management Catalogue Agency (Active) Primary Buy RNCC 3 RNVC 2 DAC 4 M/KA 14474-8
14474 -8 Y5052 - Central Management Catalogue Agency (Active) Primary Buy RNCC 3 RNVC 2 DAC 4 M/KA 14474
-25-160-2918 Mounting Bracket 5340251602918 251602918 Active) Primary Buy RNCC 3 RNVC 2 DAC 4 M/KA 14474
Mounting Bracket 5340251602918251602918 930-14474 https//www.nsnlookup.com https//www.nsnlookup.com
Sleeve Bushing 3120143177119 143177119,14474 M/KA 14474-8 $1 a day Upgrade your Account Upgrade 6160
-8 Y5052 - Central Management Catalogue Agency (Active) Primary Buy RNCC 3 RNVC 2 DAC 4 M/KA 14474-8
Restrictions 3040-01-229-7588
3040-01-229-7588 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-229-7588
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-229-7588
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- Poland (WP01)
- Effective Date:
- 1 May 2007
- Denmark (ZS01)
- Effective Date:
- 1 Mar 2015
Approved Sources 3040-01-229-7588
- Part Number
- Manufacturer
- Status
- H14474
- Manufacturer
- 62228 - Meggitt Defense Systems, Inc. (Active)
- Primary Buy
- Primary Buy
- H14474
- 58163 - Meggitt (North Hollywood), Inc. (Active)
- Original Design
- Original Design
- 14474
- 58163 - Meggitt (North Hollywood), Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 14474
- 33654 - Howden Fluid Systems (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-229-7588
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material Document And Classification [MDCL]
- Qq-S-763,303 Fed Spec Single Material Response
- Material [MATT]
- Steel Corrosion Resisting
- Overall Length [ABHP]
- 1.288 Inches Nominal
Weapon Systems (WSDC) 3040-01-229-7588
DLA Procurement Analysis 3040-01-229-7588
Management Data 3040-01-229-7588
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-01-229-7588
Freight Information 3040-01-229-7588
3040-01-229-7588 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-229-7588 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-229-7588 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-229-7588 is not classified as a special type of cargo when transported by water. 3040-01-229-7588 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-229-7588
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-203, Kraft Wrapping Paper
- --
- --
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- A-A-203, Kraft Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-01-229-7588 7 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L218P0938
- 30 Jul 2018
- Subscribe
- 18
- Subscribe
- Subscribe
- Subscribe
- SPE7L317V9974P00001
- 06 Sep 2017
- Subscribe
- 5
- Subscribe
- Subscribe
- Subscribe
- SPE7L016V4487
- 15 Apr 2016
- Subscribe
- 3
- Subscribe
- Subscribe
- Subscribe
- SPE7L316V5450
- 05 Apr 2016
- Subscribe
- 2
- Subscribe
- Subscribe
- Subscribe
- SPE7L315M5706
- 12 May 2015
- Subscribe
- 4
- Subscribe
- Subscribe
- Subscribe
- SPE7L014V6239
- 14 Aug 2014
- Subscribe
- 5
- Subscribe
- Subscribe
- Subscribe
- SPM7L013M2748
- 06 Feb 2013
- Subscribe
- 14
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3040-01-229-7588 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: