Premium Information is available for this item - Upgrade for $1 a day
3040-01-221-5611
Shouldered Shaft
3040012215611 012215611 SSN593-520-1862113 PIECE 15 SSN612-520-1945961 PIECE 15 SSN612-520-1945961 SSN593-520-1862113
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-221-5611
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-221-5611 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-221-5611 RQST NE Updated Every Day 3040-01-221-5611 RQST
Updated Every Day 3040-01-221-5611 RQST NE Related Documents 3040-01-221-5611 5+ Documents ( More...
Shouldered Shaft 3040012215611 012215611 3040-01-221-5611 Shouldered Shaft 3040012215611 https/
day Upgrade your Account Upgrade 3130-01-224-4706Plain Bearing Unit3130012244706 012244706 SSN593-520-1862113
day Upgrade your Account Upgrade 3130-01-223-7187Plain Bearing Unit3130012237187 012237187 SSN593-520-1862113
Every Day 3130-01-223-7187 RQST NE Restrictions https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-221-5611
PIECE 11 SSN612-520-1945961 PIECE 11 An item which has one end designed to form a rigid connection
Shouldered Shaft 3040012215611 012215611 RQST NE Updated Every Day 3040-01-221-5611 RQST https/
www.nsnlookup.com /fsg-31/fsc-3130/us 3130-01-225-2222 Plain Bearing Unit 3130012252222012252222 SSN593-520-1862113
day Upgrade your Account Upgrade 3130-01-225-2222Plain Bearing Unit3130012252222 012252222 SSN593-520-1862113
Restrictions 3040-01-221-5611
3040-01-221-5611 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-221-5611
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-221-5611
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHD
Approved Sources 3040-01-221-5611
- Part Number
- Manufacturer
- Status
- SSN593-520-1862113 PIECE 15
- Manufacturer
- 81316 - Portsmouth Naval Shipyard (Active)
- Primary Buy
- Primary Buy
- SSN612-520-1945961 PIECE 15
- 81316 - Portsmouth Naval Shipyard (Active)
- Primary Buy
- Primary Buy
- SSN612-520-1945961
- 81316 - Portsmouth Naval Shipyard (Active)
- Informational Drawing
- Informational Drawing
- SSN593-520-1862113
- 81316 - Portsmouth Naval Shipyard (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-221-5611
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-286 Class A Fed Spec Single Material Response
- Surface Finish [CSYM]
- 63.0 Microinches
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 2.4920 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Two Indented Flat Keyways
- Second End Keyway Width [AMFR]
- 0.5000 Inches Nominal
- Second End External Keyway Length [AMFS]
- 3.250 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.2187 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 1.8125 Inches Nominal
- Second End Diameter [AMFZ]
- 1.9600 Inches Nominal
- Second End Angle Between Keyways [AMHY]
- 135.0 Degrees Nominal
- Largest Step Diameter [CSPY]
- 2.492 Inches Nominal
- Overall Length [ABHP]
- 25.438 Inches Nominal
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-01-221-5611
Management Data 3040-01-221-5611
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-221-5611
Freight Information 3040-01-221-5611
3040-01-221-5611 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-221-5611 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-221-5611 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-221-5611 is not classified as a special type of cargo when transported by water. 3040-01-221-5611 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-221-5611
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-221-5611 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: