Premium Information is available for this item - Upgrade for $1 a day
3040-01-220-0039
Shouldered Shaft
3040012200039 012200039 77656-31X6 PIECE 14 SSN637-505-2143924 PIECE 14 SSN637-505-2143924 77656-31X6
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-220-0039
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-220-0039 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-220-0039 RQST NE Updated Every Day 3040-01-220-0039 RQST
Updated Every Day 3040-01-220-0039 RQST NE Related Documents 3040-01-220-0039 5+ Documents ( More...
/fsg-31/fsc-3120/us
PIECE 3 SSN637-505-2143924 PIECE 3 A tubular shaped unthreaded item with or without a flange at
505-2143924 PIECE 3 A tubular shaped unthreaded https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-220-0039
PIECE 15 77656-31X6 PIECE 15 An item of any peripheral shape usually having one flat or spherical
3040-01-219-9244 Shouldered Shaft 3040012199244 012199244 Sleeve Bushing 3120012411592012411592 77656-31X6
PIECE 10 SSN637-505-214392477656-31X6 A straight shaft having two or PIECE 3 SSN637-505-2143924
PIECE 11 320-4457714 PIECE 10 C-652 77655-31X6 SSN637-505-2143924 PIECE 6 SSN637-505-2143924
/fsg-30/fsc-3040/us
PIECE 3 SSN637-505-2143924 PIECE 3 A tubular shaped unthreaded item with or without a flange at
PIECE 15 77656-31X6 PIECE 15 An item of any peripheral shape usually having one flat or spherical
Restrictions 3040-01-220-0039
3040-01-220-0039 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-220-0039
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-220-0039
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-220-0039
- Part Number
- Manufacturer
- Status
- 77656-31X6 PIECE 14
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- SSN637-505-2143924 PIECE 14
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- SSN637-505-2143924
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 77656-31X6
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-220-0039
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.9970 Inches Minimum And 0.9980 Inches Maximum
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Length [AMDM]
- 1.813 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.9970 Inches Minimum And 0.9980 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 0.8490 Inches Minimum And 0.8540 Inches Maximum
- First End Spline Quantity [BDSQ]
- 10
- Material Document And Classification [MDCL]
- Qq-N-281,Class A Fed Spec Single Material Response And Mil-T-1368,Type 1,Condition 1 Mil Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 1.350 Inches Nominal
- Second End Hole Depth [AMHD]
- 0.998 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.2813 Inches Nominal
- Second End Diameter [AMFZ]
- 0.9970 Inches Minimum And 0.9980 Inches Maximum
- Second End Distance From Hole Center To End [AMGT]
- 0.906 Inches Nominal
- Second End Spline Quantity [BDSR]
- 10
- Second End Style [AAHP]
- Cross Drilled Hole And Splined (Straight)
- Second End Spline Length [AMGA]
- 1.813 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 0.9970 Inches Minimum And 0.9980 Inches Maximum
- Second End Spline Minor Diameter [AMGB]
- 0.8490 Inches Minimum And 0.8540 Inches Maximum
- Overall Length [ABHP]
- 48.000 Inches Nominal
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-01-220-0039
Management Data 3040-01-220-0039
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-220-0039
Freight Information 3040-01-220-0039
3040-01-220-0039 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-220-0039 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-220-0039 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-220-0039 is not classified as a special type of cargo when transported by water. 3040-01-220-0039 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-220-0039
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-220-0039 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: