Premium Information is available for this item - Upgrade for $1 a day
3040-01-219-6578
Shouldered Shaft
3040012196578 012196578 SSN605-520-2013499 PIECE 16 SSN605-520-2013499
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-219-6578
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-219-6578 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-219-6578 RQST NE Updated Every Day 3040-01-219-6578 RQST
Updated Every Day 3040-01-219-6578 RQST NE Related Documents 3040-01-219-6578 5+ Documents ( More...
Shouldered Shaft 3040012196578 012196578 SSN605-520-2013499 3040/us 3040-01-219-6577 Straight Shaft
3040012196577 012196577 Unit3130012237188 012237188 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-219-6578
/fsg-31/fsc-3120/us
$1 a day Upgrade your Account Upgrade 3120-01-223-7177Sleeve Bushing3120012237177 012237177 SSN605-520-2013499
Day 3120-01-223-7177 RQST NE Restrictions https https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-219-6578
day Upgrade your Account Upgrade 3130-01-223-7189Plain Bearing Unit3130012237189 012237189 SSN605-520-2013499
Every Day 3130-01-223-7189 RQST NE Restrictions https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-219-6578
/fsg-30/fsc-3040/us
PIECE 17 SSN605-520-2013499 A straight shaft having two or more of the following conditions:
www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-219-6577 Straight Shaft 3040012196577012196577 SSN605-520-2013499
Restrictions 3040-01-219-6578
3040-01-219-6578 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-219-6578
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-219-6578
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-219-6578
- Part Number
- Manufacturer
- Status
- SSN605-520-2013499 PIECE 16
- Manufacturer
- 81316 - Portsmouth Naval Shipyard (Active)
- Primary Buy
- Primary Buy
- SSN605-520-2013499
- 81316 - Portsmouth Naval Shipyard (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-219-6578
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 2.4920 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Qq-N-286 Fed Spec Single Material Response
- Material [MATT]
- Copper Alloy Or Nickel Alloy
- Largest Step Diameter [CSPY]
- 2.492 Inches Nominal
- Second End Internal Thread Length [AMHP]
- 0.500 Inches Nominal
- Second End Diameter [AMFZ]
- 1.9600 Inches Nominal
- Second End Style [AAHP]
- Internal Threaded
- Overall Length [ABHP]
- 26.062 Inches Nominal
- Special Features [FEAT]
- Second End 2 Keyways 0.500 In. W,3.250 In. Lg
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-01-219-6578
Management Data 3040-01-219-6578
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-219-6578
Freight Information 3040-01-219-6578
3040-01-219-6578 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-219-6578 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-219-6578 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-219-6578 is not classified as a special type of cargo when transported by water. 3040-01-219-6578 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-219-6578
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 27.0" H x 3.0" W x 3.0" L
- --
- --
- --
- Any Suitable Process
- 27.0" H x 3.0" W x 3.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-219-6578 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: