Premium Information is available for this item - Upgrade for $1 a day
3040-01-216-9126
Shouldered Shaft
3040012169126 012169126 35612
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
6
Marketplace 3040-01-216-9126
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-216-9126 5+ Documents (More...)
Updated Every Day 3040-01-216-9126 RQST NE Related Documents 3040-01-216-9126 5+ Documents ( More...
Every Day 3040-01-216-9126 RQST NE Related Documents 3040-01-216-9126 5+ Documents ( More...
Day 3020-00-180-3107 RQST Updated Every Day 3020-00-180-3107 RQST NE Related ISS 4 7845X256MO1 NB 35612
Worm Gear 3020001803107 001803107,35612 RL4M MK13 35612 6396 A valve designed to automatically https
/www.nsnlookup.com /fsg-49/fsc-4910/fr 4910-14-204-9875 Pressiometre 4910142049875 142049875,35612 35612
6396 A valve designed to automatically maintain within close ISS 4 7845X256MO1 NB 35612 /fsg-49/fsc-
RL4M MK13 35612 6396 A valve designed to automatically maintain within close ISS 4 7845X256MO1 NB 35612
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-216-9126 Shouldered Shaft 3040012169126 012169126
how to enable JavaScript in your web browser . 4910-14-204-9875Pressiometre4910142049875 142049875 35612
/www.nsnlookup.com /fsg-49/fsc-4910/fr 4910-14-204-9875 Pressiometre 4910142049875 142049875,35612 35612
Restrictions 3040-01-216-9126
3040-01-216-9126 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-216-9126
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-216-9126
- US Air Force (FUGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FUAX
Approved Sources 3040-01-216-9126
- Part Number
- Manufacturer
- Status
- 35612
- Manufacturer
- 26612 - Gurley Precision Instruments Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-216-9126
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Infrared Reconnaissance System An/Aad 5
- Fsc Application Data [ZZZV]
- Spin Mirror Encoder
- Material [MATT]
- Steel
- Special Features [FEAT]
- Used To Couple Rotating Disc With Drive Power Source
DLA Procurement Analysis 3040-01-216-9126
Management Data 3040-01-216-9126
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- PK
- PHOTOGRAPHIC SYSTEMS COMPONENTS, AND SUPPLIES 428A, 430A, TACTICAL INFORMATION PROCESSING AND INTERPRETATION SYSTEM
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3040-01-216-9126
Freight Information 3040-01-216-9126
3040-01-216-9126 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-216-9126 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-216-9126 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-216-9126 is not classified as a special type of cargo when transported by water. 3040-01-216-9126 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-216-9126 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: