Premium Information is available for this item - Upgrade for $1 a day
3040-01-213-7741
Shouldered Shaft
3040012137741 012137741 114403 SM-B-423626
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
4
Marketplace 3040-01-213-7741
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-213-7741 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-213-7741 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 3040-01-213-7741 RQST NE Updated Every Day 3040-01-213-7741 RQST
Shouldered Shaft 3040012137741 012137741 Upgrade your Account Upgrade 3040-01-213-7741Shouldered
Shaft3040012137741 012137741 114403 SM-B-423626 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-213-7741
5697 Airspeed Controller 4920008675697008675697 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-213-7741
Shouldered Shaft 3040012137741 012137741 3040-01-213-7741 1+ Documents ( More... ) https https/
Shouldered Shaft 3040012137741 012137741 Upgrade your Account Upgrade 3040-01-213-7741Shouldered
Shaft3040012137741 012137741 114403 SM-B-423626 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-213-7741
www.nsnlookup.com /fsg-59/fsc-5935/uk 5935-99-639-2241 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-213-7741
Shouldered Shaft 3040012137741 012137741 NumberManufacturerStatus114403 19564 - Crsi Inc Delaware
Restrictions 3040-01-213-7741
3040-01-213-7741 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-213-7741
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-213-7741
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 3040-01-213-7741
- Part Number
- Manufacturer
- Status
- 114403
- Manufacturer
- 19564 - Crsi Inc Delaware (Obsolete)
- Original Design
- Original Design
- SM-B-423626
- 80063 - Us Army Communications & Electronics (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-213-7741
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Corrosion Resisting
- Material Document And Classification [MDCL]
- Qq-S-763 Cl 302 Cond A Cold Drawn Fed Spec Single Material Response
- Surface Finish [CSYM]
- 125.0 Microinches
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 0.3800 Inches Nominal
- First End External Thread Length [AMEA]
- 0.750 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Hexagonal
- Second End Diameter [AMFZ]
- 0.4690 Inches Nominal
- Second End Width Across Flats [ACMD]
- 0.625 Inches Nominal
- Second End Step Length [CTBM]
- 0.250 Inches Nominal
- Overall Length [ABHP]
- 1.656 Inches Nominal
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-01-213-7741
Management Data 3040-01-213-7741
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-213-7741
Freight Information 3040-01-213-7741
3040-01-213-7741 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-213-7741 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-213-7741 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-213-7741 is not classified as a special type of cargo when transported by water. 3040-01-213-7741 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-213-7741
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 2.0" H x 1.0" W x 1.0" L
- --
- --
- --
- Any Suitable Process
- 2.0" H x 1.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-213-7741 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: