Premium Information is available for this item - Upgrade for $1 a day
3040-01-210-5804
Straight Shaft
3040012105804 012105804 305463 ITEM 1 306112
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
November 2023
10
Marketplace 3040-01-210-5804
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-210-5804 5+ Documents (More...)
/fsg-30/fsc-3040/us
Updated Every Day 3040-01-210-5804 RQST NE Updated Every Day 3040-01-210-5804 RQST Updated Every Day
3040-01-210-5804 RQST NE Related Documents 3040-01-210-5804 5+ Documents ( More... ) https//www.nsnlookup.com
A9840 - Wartsila Italia Spa (Active) Primary Buy RNCC 3 RNVC 2 DAC 1 306112 A9840 - Wartsila Italia
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-210-5804 Straight Shaft 3040012105804 012105804
306112 A circular-shaped item designed to maintain predetermined distance between assembled parts and
Straight Shaft 3040012105804 012105804 Upgrade your Account Upgrade 3040-01-210-5804Straight Shaft3040012105804
306112 A circular-shaped item designed to maintain predetermined distance between assembled parts and
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-210-5804 Straight Shaft 3040012105804 012105804
Straight Shaft 3040012105804 012105804 Upgrade for $1 a day Upgrade your Account Upgrade 3040-01
-210-5804Straight Shaft3040012105804 012105804 305463 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040
Restrictions 3040-01-210-5804
3040-01-210-5804 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-210-5804
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-210-5804
- US Navy (N9BC)
- Effective Date:
- 1 Jun 2009
- Former MOE Rule:
- N1H5
- Supplementary Collaborators:
- HDHX
- Spain (YB01)
- Effective Date:
- 1 May 1997
- Australia (ZA01)
- Effective Date:
- 1 Jun 1995
Approved Sources 3040-01-210-5804
- Part Number
- Manufacturer
- Status
- 306112
- Manufacturer
- 58163 - Meggitt (North Hollywood), Inc. (Active)
- Primary Buy
- Primary Buy
- 305463 ITEM 1
- 58163 - Meggitt (North Hollywood), Inc. (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 305463 ITEM 1
- 33654 - Howden Fluid Systems (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 306112
- 33654 - Howden Fluid Systems (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-210-5804
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material Document And Classification [MDCL]
- Mil-S-7720 Mil Spec Single Material Response
- Material [MATT]
- Steel
- Overall Length [ABHP]
- 8.270 Inches Minimum And 8.330 Inches Maximum
Weapon Systems (WSDC) 3040-01-210-5804
DLA Procurement Analysis 3040-01-210-5804
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-210-5804
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-210-5804
Freight Information 3040-01-210-5804
3040-01-210-5804 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-210-5804 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-210-5804 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-210-5804 is not classified as a special type of cargo when transported by water. 3040-01-210-5804 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-210-5804
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 130.0" H x 0.1" W x 0.1" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 130.0" H x 0.1" W x 0.1" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- No Requirement
- No Requirement
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 3040-01-210-5804 2 Records
Contracting Technical Data File (CTDF) 3040-01-210-5804 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: