3040-01-208-1108

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Worm Shaft (INC 18249) | DAC: 5 9 May 1985 3040-01-208-1108

5330-01-570-4362 5330015704362 015704362 is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

| DAC: 5 9 May 1985 3040-01-208-1109 Worm Shaft 5704402RNCC: 3 | RNVC: 2 | DAC: 5 9 May 1985 3040-01-208-1108

5310-14-570-4362 5310145704362 145704362 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1986 5210-00-856-5752 Internal Indicating Gage 108637CRNCC: C | RNVC: 1 | DAC: 4 29 Sep 1967 3040-01-208-1108