Premium Information is available for this item - Upgrade for $1 a day
3040-01-203-5461
Shouldered Shaft
3040012035461 012035461 11278 CA11207-7 CA10930 PIECE 7 CA11207
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-203-5461
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-203-5461 5+ Documents (More...)
CA11207-7 SHAFT,SHOULDERED 1 EA NS Request Quotation FedMall Updated Every 15 Minutes 3040-01-203-5461
-7CA10930 PIECE 7CA11207 A shaft having two or more different diameters (greater than CA11207-7 SHAFT
Shouldered Shaft 3040012035461 012035461 -9 CA11207 Wearing Ring 4320008353860008353860 Upgrade
Shouldered Shaft 3040012035461 012035461 a day Upgrade your Account Upgrade 3040-01-203-5461Shouldered
-9Y1 A cylindrical item with or without flange(s), designed to be inserted in a pump casing or CA11207
Shouldered Shaft 3040012035461 012035461 CA11207-7 83130 - Air & Liquid Systems Corporation https
Shouldered Shaft 3040012035461 012035461 Upgrade your Account Upgrade 3040-01-203-5461Shouldered
Shaft3040012035461 012035461 11278 CA11207-7 CA10930 3040-01-203-5461 5+ Documents ( More... ) https
CA11207-9Z1 RING,WEARING 4 EA NS Request Quotation Updated Every Day 4320-00-835-3858 RQST NE Updated
-9Z1 A cylindrical item with or without flange(s), designed to be inserted in a pump casing or CA11207
Restrictions 3040-01-203-5461
3040-01-203-5461 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-203-5461
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-203-5461
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-203-5461
- Part Number
- Manufacturer
- Status
- 11278
- Manufacturer
- 54402 - Rps-Fl, Inc. (Active)
- Primary Buy
- Primary Buy
- CA11207-7
- 83130 - Air & Liquid Systems Corporation (Active)
- Primary Buy
- Primary Buy
- CA10930 PIECE 7
- 83130 - Air & Liquid Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
- CA11207
- 83130 - Air & Liquid Systems Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-203-5461
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-281 Class A Cold Drawn Fed Spec Single Material Response
- Surface Finish [CSYM]
- 32.0 Microinches
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 0.5000 Inches Nominal
- First End External Thread Length [AMEA]
- 0.500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.7500 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.438 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.501 Inches Nominal
- Overall Length [ABHP]
- 20.813 Inches Nominal
- Step Quantity [ATPC]
- 10
DLA Procurement Analysis 3040-01-203-5461
Management Data 3040-01-203-5461
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Navy (DN)
- N
- X
- Formerly 4320
- X
- Defense Logistics Agency (DS)
- I
- X
- Formerly 4320
- X
Navy
- Cognizance:
- 3B
Similar Supply Items to 3040-01-203-5461
Freight Information 3040-01-203-5461
3040-01-203-5461 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-203-5461 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-203-5461 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-203-5461 is not classified as a special type of cargo when transported by water. 3040-01-203-5461 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-203-5461
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- 3/4 inch thick
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-203-5461 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: