Premium Information is available for this item - Upgrade for $1 a day
3040-01-202-4516
Shouldered Shaft
3040012024516 012024516 2308105
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
6
Marketplace 3040-01-202-4516
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-202-4516 3+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-202-4516 RQST NE Updated Every Day 3040-01-202-4516 RQST
Updated Every Day 3040-01-202-4516 RQST NE Related Documents 3040-01-202-4516 3+ Documents ( More...
-99-963-2308 105 Millimeter Projectile 1315999632308 JavaScript in your web browser . 1315-99-963-2308105
-99-963-2308 105 Millimeter Projectile 1315999632308 JavaScript in your web browser . 1315-99-963-2308105
Restrictions 3040-01-202-4516
3040-01-202-4516 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-202-4516
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-202-4516
- National Security Agency (DGX1)
- Effective Date:
- 1 Aug 2007
Approved Sources 3040-01-202-4516
- Part Number
- Manufacturer
- Status
- 2308105
- Manufacturer
- 54089 - Drs C3 & Aviation Company (Active)
- Primary Buy
- Primary Buy
- 2308105
- 22380 - Drs Photronics, Inc. (Replaced)
- Original Design
- Original Design
Datasheet 3040-01-202-4516
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3740 Inches Minimum And 0.3750 Inches Maximum
- First End Bearing Seat Diameter [AMEL]
- 0.6250 Inches Nominal
- First End Bearing Seat Length [AMEJ]
- 0.060 Inches Nominal
- First End Distance From Bearing Seat To End [AMEP]
- 1.500 Inches Nominal
- First End Style [AAGZ]
- Bearing Seat
- Material Document And Classification [MDCL]
- Qq-S-764,Condition A Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 303
- Largest Step Diameter [CSPY]
- 0.625 Inches Nominal
- Second End Diameter [AMFZ]
- 0.3740 Inches Minimum And 0.3750 Inches Maximum
- Second End Hole Diameter [AMGS]
- 0.0930 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.190 Inches Nominal
- Second End Style [AAHP]
- Unthreaded Cross Drilled
- Overall Length [ABHP]
- 3.750 Inches Nominal
- Step Quantity [ATPC]
- 3
- Surface Finish [CSYM]
- 32.0 Microinches
DLA Procurement Analysis 3040-01-202-4516
Management Data 3040-01-202-4516
Similar Supply Items to 3040-01-202-4516
Freight Information 3040-01-202-4516
3040-01-202-4516 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-202-4516 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-202-4516 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-202-4516 is not classified as a special type of cargo when transported by water. 3040-01-202-4516 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-202-4516
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb to 5lb, all dimensions less than 24"
- Above 110G
- MIL-PRF-16173, Cosmoline, Grade 2, Soft Film
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 4.0" H x 1.0" W x 1.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 4.0" H x 1.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- 1/4 inch thick
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-202-4516 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: