Premium Information is available for this item - Upgrade for $1 a day
3040-01-194-1916
Shouldered Shaft
3040011941916 011941916 77643-74 X 2 PIECE 31 SSN637-501-2143875 PIECE 31 SSN637-501-2143875 77643-74 X 2
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-194-1916
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-194-1916 5+ Documents (More...)
PIECE 13 SSN637-501-2143875 PIECE 13 501-2143875 77643-74X2 A gear, cylindrical in form, with straight
PI SSN637-501-2143875 PIECE 10 77643-74X2 PIECE 10 A cone-shaped headless item, having a threaded
PIECE 30 SSN637-501-2143875 PIECE 30 SSN637-501-2143875 77643-74 X 2 A shaft having two or more
PIECE 13 SSN637-501-2143875 PIECE 13 501-2143875 77643-74X2 A gear, cylindrical in form, with straight
PIECE 29 SSN637-501-2143875 PIECE 29 SSN637-501-2143875 77643-74 X 2 A shaft having two or more
PIECE 13 SSN637-501-2143875 PIECE 13 501-2143875 77643-74X2 A gear, cylindrical in form, with straight
PIECE 22 SSN637-501-2143875 PIECE 22 SSN637-501-2143875 77643-74 X 2 A shaft having two or more
PIECE 13 SSN637-501-2143875 PIECE 13 501-2143875 77643-74X2 A gear, cylindrical in form, with straight
PIECE 13 SSN637-501-2143875 PIECE 13 501-2143875 77643-74X2 A gear, cylindrical in form, with straight
5315011944662 011944662 Account Upgrade 5315-01-194-4662Threaded Tapered Pin5315011944662 011944662 77643-74 X 2
Restrictions 3040-01-194-1916
3040-01-194-1916 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-194-1916
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-194-1916
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-194-1916
- Part Number
- Manufacturer
- Status
- 77643-74 X 2 PIECE 31
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- SSN637-501-2143875 PIECE 31
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- SSN637-501-2143875
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 77643-74 X 2
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-194-1916
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.8750 Inches Nominal
- First End External Thread Length [AMEA]
- 0.938 Inches Nominal
- First End Style [AAGZ]
- External Threaded
- Material Document And Classification [MDCL]
- Qq-N-281 Class A Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 1.247 Inches Minimum And 1.248 Inches Maximum
- Overall Length [ABHP]
- 13.063 Inches Nominal
- Step Quantity [ATPC]
- 3
- Surface Finish [CSYM]
- 125.0 Microinches
DLA Procurement Analysis 3040-01-194-1916
Management Data 3040-01-194-1916
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-194-1916
Freight Information 3040-01-194-1916
3040-01-194-1916 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-194-1916 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-194-1916 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-194-1916 is not classified as a special type of cargo when transported by water. 3040-01-194-1916 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-194-1916
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-194-1916 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: