Premium Information is available for this item - Upgrade for $1 a day
3040-01-192-0456
Shouldered Shaft
3040011920456 011920456 520-4674693 ITEM 10 87611-1407 ITEM 10 87611-1407 520-4674693
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-192-0456
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-192-0456 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-192-0456 RQST NE Updated Every Day 3040-01-192-0456 RQST
87611-1407 A grouping of one or more GEAR, WORM and GEAR, WORM WHEEL and/or 520-4674693 ITEM 3520-4674693
PC 3 4674693-0003 520-4674693 ITEM 3 520-4674693 A rigid item usually in the form of an arm of various
Shouldered Shaft 3040011920456 011920456 for $1 a day Upgrade your Account Upgrade 3040-01-192-
for $1 a day Upgrade your Account Upgrade 3040-01-192-0456Shouldered Shaft3040011920456 011920456 520
-4674693 ITEM 10 87611-1407 ITEM 10 87611-1407 520-4674693 A shaft having two or more different diameters
A rigid item usually in the form of an arm of various 87611-1407 A grouping of one ITEM 3 520-4674693
A rigid item usually in the form of an arm of various ITEM 10 87611-1407 ITEM 10 https//www.nsnlookup.com
a day Upgrade your Account Upgrade 6105-01-190-5405Motor Mounting Plate6105011905405 011905405 520-4674693
a day Upgrade your Account Upgrade 6105-01-190-5405Motor Mounting Plate6105011905405 011905405 520-4674693
Restrictions 3040-01-192-0456
3040-01-192-0456 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-192-0456
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-192-0456
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-192-0456
- Part Number
- Manufacturer
- Status
- 520-4674693 ITEM 10
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
- 87611-1407 ITEM 10
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 87611-1407
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
- 520-4674693
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-192-0456
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Qq-S-763 Cl 304 Cond B Fed Spec Single Material Response
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 2.0000 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- External Threaded
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.969 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.000 Inches Nominal
- Overall Length [ABHP]
- 10.125 Inches Nominal
- Step Quantity [ATPC]
- 4
Weapon Systems (WSDC) 3040-01-192-0456
DLA Procurement Analysis 3040-01-192-0456
Management Data 3040-01-192-0456
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-192-0456
Freight Information 3040-01-192-0456
3040-01-192-0456 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-192-0456 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-192-0456 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-192-0456 is not classified as a special type of cargo when transported by water. 3040-01-192-0456 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-192-0456
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- A-A-1051, Paperboard Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-192-0456 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: