Premium Information is available for this item - Upgrade for $1 a day
3040-01-191-8370
Straight Shaft
3040011918370 011918370 4684482 ITEM 8 201-4684482 ITEM 8 87776-0107 ITEM 8 87776-0107 201-4684482
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
4
Marketplace 3040-01-191-8370
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-191-8370 5+ Documents (More...)
/fsg-30/fsc-3040/us
ITEM21 ITEM3 ITEM9 201-4684482 ITEM 21 201-4684482 ITEM 21 AND 3 87776 ITEM 2 87776-0107 ITEM 2
Universal Joint 2520011235078 ITEM 3 201-4684482 ITEM21 ITEM3 ITEM9 87776-0107 ITEM21 ITEM3 ITEM9 201
Straight Shaft 3040011918370 011918370 Upgrade your Account Upgrade 3040-01-191-8370Straight Shaft3040011918370
011918370 4684482 ITEM 8 201-4684482 ITEM 8 87776-0107 ITEM 8 87776-0107 201-4684482 A straight shaft
ITEM21 ITEM3 ITEM9 87776-0107 ITEM21 ITEM3 ITEM9 201-4684482 ITEM 21 201-4684482 ITEM 21 AND 3 87776
ITEM 2 87776-0107 ITEM 2 87776-01-7 ITEM2 201-468448287776-0107 A component of a universal ITEM 8 87776
ITEM 21 AND 3 87776-0107 ITEM 21 87776-0107 ITEM 21 AND 3 87776-0107 201-4684482 A flexible connection
ITEM 2 87776-0107 ITEM 2 87776-01-7 ITEM2 201-468448287776-0107 A component of a universal ITEM 8 87776
Straight Shaft 3040011918370 011918370 ITEM 8 87776-0107 ITEM 8 87776-0107201-4684482 A straight
Bent Tube 4710011550197 011550197 ITEM 8 87776-0107 ITEM 8 87776-0107201-4684482 A straight shaft having
Restrictions 3040-01-191-8370
3040-01-191-8370 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-191-8370
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-191-8370
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-191-8370
- Part Number
- Manufacturer
- Status
- 4684482 ITEM 8
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 201-4684482 ITEM 8
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 87776-0107 ITEM 8
- 96169 - Electric Boat Corporation (Active)
- Secondary Buy
- Secondary Buy
- 87776-0107
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
- 201-4684482
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-191-8370
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 3.0000 Inches Nominal
- First End Angle Between Keyways [AMFE]
- 180.0 Degrees Nominal
- First End Keyway Depth [AMDG]
- 0.386 Inches Minimum And 0.391 Inches Maximum
- First End Keyway Width [AMCZ]
- 0.7505 Inches Nominal
- First End Distance From Keyway Center To End [AMDH]
- 2.373 Inches Nominal
- First End Style [AAGZ]
- Two Indented Flat Keyways
- Material Document And Classification [MDCL]
- Qq-N-285 Cl A Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Overall Length [ABHP]
- 53.060 Inches Nominal
- Surface Finish [CSYM]
- 250.0 Microinches
Weapon Systems (WSDC) 3040-01-191-8370
DLA Procurement Analysis 3040-01-191-8370
Management Data 3040-01-191-8370
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-191-8370
Freight Information 3040-01-191-8370
3040-01-191-8370 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-191-8370 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-191-8370 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-191-8370 is not classified as a special type of cargo when transported by water. 3040-01-191-8370 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-191-8370
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-191-8370 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: