Premium Information is available for this item - Upgrade for $1 a day
3040-01-186-1372
Shouldered Shaft
3040011861372 011861372 245413
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
4
Marketplace 3040-01-186-1372
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-186-1372 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-186-1372 RQST NE Updated Every Day 3040-01-186-1372 RQST
Updated Every Day 3040-01-186-1372 RQST NE Related Documents 3040-01-186-1372 5+ Documents ( More...
//www.nsnlookup.com /fsg-53/fsc-5330/fr 5330-14-541-4931 Gasket 5330145414931 145414931,245413-6Y 245413
https//www.nsnlookup.com /fsg-53/fsc-5330/fr https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-186-1372
Shouldered Shaft 3040011861372 011861372 for $1 a day Upgrade your Account Upgrade 3040-01-186-
1372Shouldered Shaft3040011861372 011861372 245413 //www.nsnlookup.com /fsg-53/fsc-5330/fr 5330-14-541
//www.nsnlookup.com /fsg-53/fsc-5330/fr 5330-14-541-4930 Gasket 5330145414930 145414930,245413-2S 245413
6605-00-487-7839 Contact Assy-Left 6605004877839 004877839 14-541-4931Gasket5330145414931 145414931 245413
for $1 a day Upgrade your Account Upgrade 3040-01-186-1372Shouldered Shaft3040011861372 011861372 245413
Shouldered Shaft 3040011861372 011861372 for $1 a day Upgrade your Account Upgrade 3040-01-186-
Restrictions 3040-01-186-1372
3040-01-186-1372 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-186-1372
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-186-1372
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
Approved Sources 3040-01-186-1372
- Part Number
- Manufacturer
- Status
- 245413
- Manufacturer
- 09205 - Lockheed Martin Corp Electronics And (Active)
- Primary Buy
- Primary Buy
- 245413
- 56122 - Bell Precision Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-186-1372
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3738 Inches Minimum And 0.3743 Inches Maximum
- First End Style [AAGZ]
- Plain
- Fsc Application Data [ZZZV]
- Detecting-Ranging Set An/Aas-38
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.950 Inches Nominal
- Material Document And Classification [MDCL]
- Ams 5643,Type 17-4 Ph Assn Std Single Material Response
- Second End Diameter [AMFZ]
- 0.3120 Inches Nominal
- Second End Step Length [CTBM]
- 0.500 Inches Nominal
- Second End Style [AAHP]
- Hexagonal
- Second End Width Across Flats [ACMD]
- 0.250 Inches Nominal
- Overall Length [ABHP]
- 2.850 Inches Nominal
- Step Quantity [ATPC]
- 10
DLA Procurement Analysis 3040-01-186-1372
Management Data 3040-01-186-1372
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-186-1372
Freight Information 3040-01-186-1372
3040-01-186-1372 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-186-1372 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-186-1372 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-186-1372 is not classified as a special type of cargo when transported by water. 3040-01-186-1372 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-186-1372 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: