Premium Information is available for this item - Upgrade for $1 a day
3040-01-185-9512
Shouldered Shaft
3040011859512 011859512 014218-1 HM025-681-1 HM025-681 014218
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
13
Marketplace 3040-01-185-9512
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-185-9512 5+ Documents (More...)
HM025-681 SHAFT,SHOULDERED 5 EA NS Request Quotation HM025-681-1 SHAFT,SHOULDERED 5 EA NS Request Quotation
HM025-681 SHAFT,SHOULDERED 5 EA NS Request Quotation HM025-681-1 SHAFT,SHOULDERED 5 EA NS Request Quotation
your Account Upgrade 5340-01-510-7518Dust And Moisture Seal Protective Cap5340015107518 015107518 014218
https 3040-01-185-9512 Shouldered Shaft 3040011859512 011859512 ) Secondary Buy RNCC 5 RNVC 2 DAC 2
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-185-9512 Shouldered Shaft 3040011859512 011859512
for $1 a day Upgrade your Account Upgrade 3040-01-185-9512Shouldered Shaft3040011859512 011859512 014218
your Account Upgrade 5340-01-510-7518Dust And Moisture Seal Protective Cap5340015107518 015107518 014218
Shouldered Shaft 3040011859512 011859512 for $1 a day Upgrade your Account Upgrade 3040-01-185-
Shouldered Shaft 3040011859512 011859512 9512Shouldered Shaft3040011859512 011859512014218 https
Restrictions 3040-01-185-9512
3040-01-185-9512 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is a US Munitions List or Commerce Control List Item which must be destroyed to prevent restoration or repair. Only authorized parties may possess this item. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-185-9512
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-185-9512
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- BFCN
- Israel (YD01)
- Effective Date:
- 1 Apr 2017
- Singapore (YJ01)
- Effective Date:
- 1 Apr 2002
- United Kingdom (ZK01)
- Effective Date:
- 1 Mar 1999
- Netherlands (ZN01)
- Effective Date:
- 1 Jun 1999
- Greece (ZU01)
- Effective Date:
- 1 Feb 2006
Approved Sources 3040-01-185-9512
- Part Number
- Manufacturer
- Status
- HM025-681-1
- Manufacturer
- 1T765 - Robertson Fuel Systems, L.L.C. (Active)
- Source Control
- Source Control
- 014218-1
- 59027 - Meggitt Defense Systems, Inc. (Active)
- Primary Buy
- Primary Buy
- HM025-681
- 1T765 - Robertson Fuel Systems, L.L.C. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 014218-1
- 62228 - Meggitt Defense Systems, Inc. (Active)
- Advisory Reference
- Advisory Reference
- 014218
- 59027 - Meggitt Defense Systems, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-185-9512
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.5000 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.5050 Inches Minimum And 0.5150 Inches Maximum
- First End Groove Width [AAHG]
- 0.1200 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.380 Inches Nominal
- First End External Thread Length [AMEA]
- 0.380 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved And Externally Threaded
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.6233 Inches Minimum And 0.6243 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5643,Cond H1150 Assn Std Single Material Response
- Overall Length [ABHP]
- 14.900 Inches Nominal
- Special Features [FEAT]
- End Styl Description Should Read Involute Splined,Circular Grooved,Externally Threaded,Thru Hole. Secondend Identical To First With Exception Of Thread Data
- Step Quantity [ATPC]
- 11
- Surface Finish [CSYM]
- 125.0 Microinches
Weapon Systems (WSDC) 3040-01-185-9512
DLA Procurement Analysis 3040-01-185-9512
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-185-9512
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- H3
- Individual and Crew-Served Weapons
Armament Subsystem, 30mm,XM139
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-01-185-9512
Freight Information 3040-01-185-9512
3040-01-185-9512 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-185-9512 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-185-9512 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-185-9512 is not classified as a special type of cargo when transported by water. 3040-01-185-9512 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-185-9512
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Vendor's Fiberboard Box
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3040-01-185-9512 1 Records
Contracting Technical Data File (CTDF) 3040-01-185-9512 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: