Premium Information is available for this item - Upgrade for $1 a day
3040-01-182-6844
Shouldered Shaft
3040011826844 011826844 87832-1604 ITEM 87832-1604 709-4684875 ITEM 18 4684875
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-182-6844
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-182-6844 5+ Documents (More...)
87832-1604 ITEM 12 709-468487587832-1604 A straight shaft having two or more ITEM 7 87832-1604 ITEM
12 87832-1604 ITEM 12 709-468487587832-1604 A straight shaft having two or more ITEM 15 709-4684875 https
Shouldered Shaft 3040011826844 011826844 straight shaft having two or more ITEM 15 709-4684875
ITEM 7 A comparatively flat rigid item, ITEM 12 87832-1604 ITEM 12 709-468487587832-1604 A straight
Updated Every Day 3010-01-211-9524 RQST ITEM 12 87832-1604 ITEM 12 709-468487587832-1604 5340-01-153-
1527 Lock Plate Bracket 5340011531527 011531527 ITE 709-4684875 ITEM 12 87832-1604 ITEM https//www.nsnlookup.com
/fsg-30/fsc-3040/us
ITEM 2 AND ITEM 19 709-4684875 ITEM 2 AND ITEM 19 709-4684875 87832-1604 An item fabricated from
Shouldered Shaft 3040011826844 011826844 ITEM 87832-1604709-4684875 ITEM 18 4684875 A shaft having
ITEM 15 709-4684875 ITEM 15 709-4684875 87832-1604 A shaft having two or more different diameters
Shouldered Shaft 3040011826844 011826844 Account Upgrade 3040-01-182-6844Shouldered Shaft3040011826844
Restrictions 3040-01-182-6844
3040-01-182-6844 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-182-6844
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-182-6844
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-182-6844
- Part Number
- Manufacturer
- Status
- 87832-1604
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 709-4684875 ITEM 18
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 87832-1604 ITEM
- 96169 - Electric Boat Corporation (Active)
- Advisory Reference
- Advisory Reference
- 4684875
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-182-6844
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 1.4960 Inches Minimum And 1.4980 Inches Maximum
- First End Keyway Width [AMCZ]
- 0.3750 Inches Minimum And 0.3770 Inches Maximum
- First End Distance From Keyway Center To End [AMDH]
- 1.002 Inches Nominal
- First End External Keyway Length [AMDE]
- 1.500 Inches Minimum And 1.510 Inches Maximum
- First End Style [AAGZ]
- Woodruff Keyway
- Material Document And Classification [MDCL]
- Mil-S-1222 Ty1 Syn 78 Mil Spec Single Material Response
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 1.820 Inches Nominal
- Overall Length [ABHP]
- 13.000 Inches Nominal
- Step Quantity [ATPC]
- 6
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-182-6844
DLA Procurement Analysis 3040-01-182-6844
Management Data 3040-01-182-6844
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-182-6844
Freight Information 3040-01-182-6844
3040-01-182-6844 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-182-6844 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-182-6844 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-182-6844 is not classified as a special type of cargo when transported by water. 3040-01-182-6844 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-182-6844 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: