Premium Information is available for this item - Upgrade for $1 a day
3040-01-181-0902
Shouldered Shaft
3040011810902 011810902 CA11002-507 CA11002-7 CA11002
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-181-0902
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-181-0902 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-181-0902 RQST NE Updated Every Day 3040-01-181-0902 RQST
Updated Every Day 3040-01-181-0902 RQST NE Related Documents 3040-01-181-0902 5+ Documents ( More...
-9 INCONEL 625 CA11002-9 INC0N 517-2295700 PC9 A cylindrical item with or without flange(s), designed
Shouldered Shaft 3040011810902 011810902 for $1 a day Upgrade your Account Upgrade 3040-01-181-
Shouldered Shaft 3040011810902 011810902 DIRT AND LIQUID 2 EA NS Request Quotation FedMall Updated
Every 15 Minutes 4320-01- -9 INCONEL 625 CA11002-9 INCONEL 625 CA11002-9 INC0N 517-2295700 PC9 A cylindrical
Documents 3130-01-267-4079 2+ Documents ( More... https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-181-0902
Shouldered Shaft 3040011810902 011810902 for $1 a day Upgrade your Account Upgrade 4320 https//
CA11002-9ICONEL625 RING,WEARING 2 EA NS Request Quotation FedMall Updated Every 15 Minutes 4320-01-182
-9 INC0N517-2295700 PC9 A cylindrical item with or without flange(s), designed Wearing Ring CA11002-9
Restrictions 3040-01-181-0902
3040-01-181-0902 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-181-0902
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-181-0902
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-181-0902
- Part Number
- Manufacturer
- Status
- CA11002-507
- Manufacturer
- 83130 - Air & Liquid Systems Corporation (Active)
- Primary Buy
- Primary Buy
- CA11002-7
- 83130 - Air & Liquid Systems Corporation (Active)
- Primary Buy
- Primary Buy
- CA11002
- 83130 - Air & Liquid Systems Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-181-0902
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Nickel Alloy
- Material Document And Classification [MDCL]
- Qq-N-281 Fed Spec Single Material Response
- First End Style [AAGZ]
- External Threaded
- First End Diameter [AMDL]
- 0.5000 Inches Nominal
- First End External Thread Length [AMEA]
- 0.625 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Externally Threaded And Flat Keyway
- Second End Keyway Width [AMFR]
- 0.3125 Inches Nominal
- Second End External Keyway Length [AMFS]
- 1.000 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.094 Inches Nominal
- Second End Diameter [AMFZ]
- 1.5620 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.750 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.001 Inches Nominal
- Overall Length [ABHP]
- 35.063 Inches Nominal
- Step Quantity [ATPC]
- 9
DLA Procurement Analysis 3040-01-181-0902
Management Data 3040-01-181-0902
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-181-0902
Freight Information 3040-01-181-0902
3040-01-181-0902 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-181-0902 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-181-0902 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-181-0902 is not classified as a special type of cargo when transported by water. 3040-01-181-0902 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-181-0902
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- Cushion, Anchor, Block or Brace as Required
- --
- Any Suitable Wood Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-181-0902 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: