Premium Information is available for this item - Upgrade for $1 a day
3040-01-171-0099
Shouldered Shaft
3040011710099 011710099 13211E8982
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
3
Marketplace 3040-01-171-0099
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-171-0099 1+ Documents (More...)
Day 3040-01-171-0099 RQST NE Related Documents 3040-01-171-0099 1+ Documents ( More... ) https//www.nsnlookup.com
/fsg-30/fsc-3040/us 3040-01-171-0099 Shouldered Shaft 3040011710099011710099 13211E8982 A shaft having
Restrictions 3040-01-171-0099
3040-01-171-0099 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-171-0099
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-171-0099
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Marine Corps (MC40)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- MC01
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 3040-01-171-0099
- Part Number
- Manufacturer
- Status
- 13211E8982
- Manufacturer
- 97403 - Cecom Lr Center (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-171-0099
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- 2350-00-808-7100
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7470 Inches Minimum And 0.7490 Inches Maximum
- First End Keyway Width [AMCZ]
- 0.1862 Inches Minimum And 0.1880 Inches Maximum
- First End Distance From Keyway Center To End [AMDH]
- 1.620 Inches Nominal
- First End External Keyway Length [AMDE]
- 0.875 Inches Minimum And 0.906 Inches Maximum
- First End External Thread Length [AMEA]
- 1.120 Inches Nominal
- First End Style [AAGZ]
- Externally Threaded And Woodruff Keyway
- Material [MATT]
- Steel Comp 1018
- Largest Step Diameter [CSPY]
- 1.750 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.250 Inches Nominal
- Second End Diameter [AMFZ]
- 0.8750 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 2.060 Inches Nominal
- Second End External Keyway Length [AMFS]
- 1.000 Inches Minimum And 1.020 Inches Maximum
- Second End Style [AAHP]
- Externally Threaded And Woodruff Keyway
- Second End Keyway Width [AMFR]
- 0.2487 Inches Minimum And 0.2505 Inches Maximum
- Overall Length [ABHP]
- 19.810 Inches Nominal
- Step Quantity [ATPC]
- 4
Weapon Systems (WSDC) 3040-01-171-0099
DLA Procurement Analysis 3040-01-171-0099
- Last Stock Position:
- 32 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-171-0099
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- IN
- Construction Equipment
Armored Combat Earthmover (ACE),M9
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 3040-01-171-0099
Freight Information 3040-01-171-0099
3040-01-171-0099 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-171-0099 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-171-0099 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-171-0099 is not classified as a special type of cargo when transported by water. 3040-01-171-0099 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-171-0099
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 21.0" H x 2.4" W x 2.4" L
- --
- --
- --
- Any Suitable Process
- 21.0" H x 2.4" W x 2.4" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- Vendor's Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-171-0099 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: