Premium Information is available for this item - Upgrade for $1 a day
3040-01-167-7073
Straight Shaft
3040011677073 011677073 87577-3310 ITEM 8 609-4676630 ITEM 8 87577-3310 4676630
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
November 2023
2
Marketplace 3040-01-167-7073
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-167-7073 5+ Documents (More...)
/fsg-30/fsc-3040/us
87577-3310 ITEM 8609-4676630 ITEM 8467663087577-3310 A straight shaft having two or more of the following
A shaft having two or more different https//www.nsnlookup.com ITEM2 87577-3310IT2 87577-3310 -4676630
different diameters Upgrade your Account Upgrade https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-167-7073
Straight Shaft 3040011677073 011677073 Upgrade for $1 a day Upgrade your Account Upgrade 3040-01
ITEM2 87577-3310IT2 87577-3310 ITEM 2 609-4676630ITEM2 609-4676630 A shaft having two or more different
-3040/us 3040-01-167-7073 Straight Shaft 3040011677073 011677073 for $1 a day Upgrade your Account Upgrade
ITEM 2 609-4676630ITEM2 609-4676630 A shaft having ITEM 8 609-4676630 ITEM 8 4676630 87577-3310
ITEM 2 609-4676630ITEM2 609-4676630 A shaft having two or more different ITEM 8 609-4676630 ITEM 8 4676630
/fsg-30/fsc-3040/us
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-167-7073 Straight Shaft 3040011677073 011677073
Upgrade your Account Upgrade 3040-01-167-7073Straight Shaft3040011677073 011677073 87577-3310 ITEM 8
Restrictions 3040-01-167-7073
3040-01-167-7073 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-167-7073
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-167-7073
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-167-7073
- Part Number
- Manufacturer
- Status
- 87577-3310 ITEM 8
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 609-4676630 ITEM 8
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 87577-3310
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
- 4676630
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-167-7073
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.7500 Inches Nominal
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Length [AMDM]
- 2.000 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.7470 Inches Minimum And 0.7480 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 0.6290 Inches Minimum And 0.6390 Inches Maximum
- First End Spline Quantity [BDSQ]
- 10
- Material Document And Classification [MDCL]
- Qq-S-763,Cond B Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 304
- Overall Length [ABHP]
- 87.781 Inches Nominal
Weapon Systems (WSDC) 3040-01-167-7073
DLA Procurement Analysis 3040-01-167-7073
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-167-7073
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-167-7073
Freight Information 3040-01-167-7073
3040-01-167-7073 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-167-7073 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-167-7073 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-167-7073 is not classified as a special type of cargo when transported by water. 3040-01-167-7073 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-167-7073
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Procurement History 3040-01-167-7073 2 Records
Contracting Technical Data File (CTDF) 3040-01-167-7073 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: