Premium Information is available for this item - Upgrade for $1 a day
3040-01-164-0022
Shouldered Shaft
3040011640022 011640022 1174322 PL-318244 ITEM 11 PL-318244
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
June 2023
4
Marketplace 3040-01-164-0022
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-164-0022 5+ Documents (More...)
RQST Updated Every Day 3040-01-164-0022 RQST NE Related Documents 3040-01-164-0022 5+ Documents
PL-318244 RNVC 2 MEDALS DAC A PL-318244 ITEM 20 34712 - Lake -20 1174412 PL-318244 (Active) Primary
Documents 3110-01-166-2696 5+ Documents ( More... https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-164-0022
Shouldered Shaft 3040011640022 011640022 11PL-318244 A shaft having two or more different https
ITEM 20 34712 - Lake -20 1174412 PL-318244 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-305-
Shouldered Shaft 3040011640022 011640022 Remote Control Lever 3040013055675013055675 3040013055675013055675
3950012891331 012891331 ITEM 20 34712 - Lake -20 1174412 PL-318244 ITEM 20 34712 - Lake -20 1174412 PL
(Active) Primary RNCC 3 RNVC 2 MEDALS DAC A PL- 318244 ITEM 20 34712 - Lake -20 1174412 PL-318244 (Active
Buy RNCC 3 RNVC 2 MEDALS DAC A PL-318244 Reeling Mac End Cap 3950012891331012891331 (Active) Primary
RNCC 3 RNVC 2 MEDALS DAC A PL- 318244 ITEM 20 34712 - Lake -20 1174412 PL-318244 (Active) Primary Buy
Restrictions 3040-01-164-0022
3040-01-164-0022 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 3040-01-164-0022
- US Coast Guard (C911)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- C001
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- France (ZF01)
- Effective Date:
- 1 Mar 1995
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 3040-01-164-0022
- Part Number
- Manufacturer
- Status
- 1174322
- Manufacturer
- 34712 - Lake Shore Systems, Inc. (Active)
- Primary Buy
- Primary Buy
- PL-318244 ITEM 11
- 34712 - Lake Shore Systems, Inc. (Active)
- Secondary Buy
- Secondary Buy
- PL-318244
- 34712 - Lake Shore Systems, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-164-0022
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 1.0010 Inches Minimum And 1.0020 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Comp 1018
- Largest Step Diameter [CSPY]
- 1.750 Inches Nominal
- Overall Length [ABHP]
- 6.312 Inches Nominal
- Step Quantity [ATPC]
- 5
- Surface Finish [CSYM]
- 63.0 Microinches
DLA Procurement Analysis 3040-01-164-0022
Management Data 3040-01-164-0022
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-164-0022
Freight Information 3040-01-164-0022
3040-01-164-0022 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-164-0022 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-164-0022 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-164-0022 is not classified as a special type of cargo when transported by water. 3040-01-164-0022 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-164-0022
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 5lb to 7.5lb, all dimensions less than 24"
- Above 110G
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-164-0022 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: