Premium Information is available for this item - Upgrade for $1 a day
3040-01-161-0948
Shouldered Shaft
3040011610948 011610948 3302952 ITEM 1 73795-A X73795-A D81-945-12 PIECE 1 B-73795A 3302952 D-81-945-12
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
6
Marketplace 3040-01-161-0948
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-161-0948 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-161-0948 RQST NE Updated Every Day 3040-01-161-0948 RQST
Updated Every Day 3040-01-161-0948 RQST NE Related Documents 3040-01-161-0948 5+ Documents ( More...
browser . 2530-12-371-4486Wheel Pneumatic Brake Cylinder Assembly2530123714486 123714486 73795 C-32-73795 A
JavaScript in your web browser . 5340-14-412-4671Retaining Strap5340144124671 144124671 73795 C-32-73795 A
Shouldered Shaft 3040011610948 011610948 Upgrade 3040-01-161-0948Shouldered Shaft3040011610948
011610948 3302952 ITEM 1 73795-A X73795-A D81-945-12 Strap5340144124671 144124671 73795 C-32-73795 A
Shouldered Shaft 3040011610948 011610948 Upgrade 3040-01-161-0948Shouldered Shaft3040011610948
011610948 3302952 ITEM 1 73795-A X73795-A D81-945-12 3040011610948011610948 Upgrade 3040-01-161-0948Shouldered
/fsg-31/fsc-3110/us 3110-01-285-3652 Cylindrical Roller Bearing 3110012853652 R1926G142420-256D2-73795 A
Updated Every /fsc-3110/us 3110-01-285-3652 Cylindrical Roller Bearing 3110012853652 R1926G142420-256D2-73795 A
Restrictions 3040-01-161-0948
3040-01-161-0948 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-161-0948
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-161-0948
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-161-0948
- Part Number
- Manufacturer
- Status
- X73795-A
- Manufacturer
- 1Q8T8 - Aljers Llc (Active)
- Primary Buy
- Primary Buy
- 73795-A
- 95402 - Electric Boat Corp (Obsolete)
- Original Design
- Original Design
- 3302952 ITEM 1
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- X73795-A
- 95402 - Electric Boat Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- D81-945-12 PIECE 1
- 95402 - Electric Boat Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- B-73795A
- 95402 - Electric Boat Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 3302952
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- D-81-945-12
- 95402 - Electric Boat Corp (Obsolete)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-161-0948
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 6.6250 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Mil-S-890 Mil Spec Single Material Response
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 6.625 Inches Nominal
- Second End Diameter [AMFZ]
- 2.4360 Inches Minimum And 2.4370 Inches Maximum
- Second End Step Length [CTBM]
- 1.250 Inches Nominal
- Second End Style [AAHP]
- Hexagonal
- Second End Width Across Flats [ACMD]
- 2.000 Inches Nominal
- Overall Length [ABHP]
- 30.438 Inches Nominal
- Special Features [FEAT]
- W1st End Partially Bored 2.000 In. Dia;Counterbored 3.250 In. Dia;1St End Six 0.483 In. Dia Drilled Through Holes Equally Spaced On 5.500 In. Dia Bolt Circle;Thread 2.548 In.-18 Uss Thd Near 2Nd End,With 0.313X0.094 In. Flat Keyway
- Step Quantity [ATPC]
- 12
DLA Procurement Analysis 3040-01-161-0948
- Last Stock Position:
- 4 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-161-0948
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-161-0948
Freight Information 3040-01-161-0948
3040-01-161-0948 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-161-0948 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-161-0948 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-161-0948 is not classified as a special type of cargo when transported by water. 3040-01-161-0948 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-161-0948
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Procurement History 3040-01-161-0948 1 Records
Contracting Technical Data File (CTDF) 3040-01-161-0948 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: