Premium Information is available for this item - Upgrade for $1 a day
3040-01-160-3612
Straight Shaft
3040011603612 011603612 87832-1649 ITEM 7 709-4684920 ITEM 7 709-4684920 87832-1649
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
2
Marketplace 3040-01-160-3612
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-160-3612 5+ Documents (More...)
/fsg-30/fsc-3040/us
a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 87832-1649
/fsg-30/fsc-3040/us 3040-01-160-3612 Straight Shaft 3040011603612011603612 87832-1649 ITEM 7709-4684920
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-160-3612 Straight Shaft 3040011603612 011603612
for $1 a day Upgrade your Account Upgrade 3040-01-160-3612Straight Shaft3040011603612 011603612 87832
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-160-3612 Straight Shaft 3040011603612 011603612
for $1 a day Upgrade your Account Upgrade 3040-01-160-3612Straight Shaft3040011603612 011603612 87832
ITEM 35 709-4684920 ITEM 35 A cylindrical body having a centrally located hole to accommodate a
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-160-3612 Straight Shaft 3040011603612 011603612
/fsg-31/fsc-3120/us
ITEM 64 87832-1649 ITEM 64 A tubular shaped unthreaded item with or without a flange at one end designed
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-291-0780 Sleeve Bushing 3120012910780012910780 709-4684920
Restrictions 3040-01-160-3612
3040-01-160-3612 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-160-3612
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-160-3612
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-160-3612
- Part Number
- Manufacturer
- Status
- 87832-1649 ITEM 7
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 709-4684920 ITEM 7
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 709-4684920
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 87832-1649
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-160-3612
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7470 Inches Minimum And 0.7480 Inches Maximum
- First End Keyway Depth [AMDG]
- 0.104 Inches Nominal
- First End Keyway Width [AMCZ]
- 0.1880 Inches Minimum And 0.1900 Inches Maximum
- First End External Keyway Length [AMDE]
- 1.844 Inches Nominal
- First End Style [AAGZ]
- Flat Keyway
- Material Document And Classification [MDCL]
- Qq-S-763,Cond B Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 304
- Second End Diameter [AMFZ]
- 0.7470 Inches Minimum And 0.7480 Inches Maximum
- Second End Spline Quantity [BDSR]
- 10
- Second End Style [AAHP]
- Splined (Straight)
- Second End Spline Length [AMGA]
- 2.125 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 0.7480 Inches Nominal
- Second End Spline Minor Diameter [AMGB]
- 0.6390 Inches Nominal
- Overall Length [ABHP]
- 12.875 Inches Nominal
Weapon Systems (WSDC) 3040-01-160-3612
DLA Procurement Analysis 3040-01-160-3612
Management Data 3040-01-160-3612
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-160-3612
Freight Information 3040-01-160-3612
3040-01-160-3612 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-160-3612 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-160-3612 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-160-3612 is not classified as a special type of cargo when transported by water. 3040-01-160-3612 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-160-3612
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-160-3612 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: