Premium Information is available for this item - Upgrade for $1 a day
3040-01-151-6327
Shouldered Shaft
3040011516327 011516327 87832-1639 ITEM 25 709-4684910 ITEM 25 87832-1639 709-4684910
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
June 2023
2
Marketplace 3040-01-151-6327
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-151-6327 5+ Documents (More...)
/fsg-30/fsc-3040/us
011516327 87832-1639 ITEM 25 709-4684910 ITEM 25 87832-1639 709-4684910 A shaft having two or more different
ITEM 3 709-4684910 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-151-5639 Shouldered Shaft
SHAFT,SHOULDERED 15 EA NS Request Quotation Subscribe to View Vendor Details... 87832-1639 SHAFT
ITEM 22 709-4684910 ITEM 22 4684910-0022 Managed by United States NSN Created on 5 Jan 1983 Data
ITEM 22 709-4684910 ITEM 22 4684910-0022 Managed by United States NSN Created on 5 Jan 1983 Data
NumberManufacturerStatus87832-1639 ITEM 22 96169 - Electric Boat Corporation (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 709-4684910
ITEM 46 709-4684910 ITEM 46 A shaft having two or more different diameters (greater than 0.031 inches
a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 87832-1639
ITEM 3 709-4684910 ITEM 3 A shaft having two or more different diameters (greater than 0.031 inches
NumberManufacturerStatus87832-1639 ITEM 3 96169 - Electric Boat Corporation (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 709-4684910
Restrictions 3040-01-151-6327
3040-01-151-6327 is a Shouldered Shaft This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-151-6327
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-151-6327
- US Air Force (FXGC)
- Effective Date:
- 1 Jan 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jan 2005
Approved Sources 3040-01-151-6327
- Part Number
- Manufacturer
- Status
- 87832-1639 ITEM 25
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 709-4684910 ITEM 25
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 87832-1639
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
- 709-4684910
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
DLA Procurement Analysis 3040-01-151-6327
Management Data 3040-01-151-6327
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-151-6327
Freight Information 3040-01-151-6327
3040-01-151-6327 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-151-6327 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-151-6327 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-151-6327 is not classified as a special type of cargo when transported by water. 3040-01-151-6327 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-151-6327 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: