Premium Information is available for this item - Upgrade for $1 a day
3040-01-150-2020
Shouldered Shaft
3040011502020 011502020 1153M55P01
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
5
Marketplace 3040-01-150-2020
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-150-2020 3+ Documents (More...)
United States (US) 4. 3040-01-150-2020 Marketplace Restrictions Approved Sources Datasheet Management
SHAFT,SHOULDERED 1 EA NS Request Quotation FedMall Updated Every 15 Minutes 3040-01-150-2020 BUY NE
Shouldered Shaft 3040011502020 011502020 www.nsnlookup.com /fsg-30/fsc -3040/us 3040-01-150-2020
Shouldered Shaft 3040011502020 011502020 United States (US) 4. 3040-01-150-2020 Marketplace Restrictions
Approved Sources Datasheet Management BUY NE FedMall Updated Every Day 3040-01-150-2020 RQST NE Related
Restrictions 3040-01-150-2020
3040-01-150-2020 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is a US Munitions List or Commerce Control List Item which must be destroyed to prevent restoration or repair. Only authorized parties may possess this item. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-150-2020
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-150-2020
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-01-150-2020
- Part Number
- Manufacturer
- Status
- 1153M55P01
- Manufacturer
- 07482 - General Electric Company (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-150-2020
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- F101-Ge-102
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.7033 Inches Nominal
- First End Style [AAGZ]
- Splined (Involute)
- First End Pitch Diameter [AMDS]
- 0.6667 Inches Nominal
- First End Pressure Angle [AMDR]
- 30.0 Degrees Nominal
- First End Spline Length [AMDM]
- 0.6200 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.7033 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 0.5743 Inches Nominal
- First End Spline Quantity [BDSQ]
- 16
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.793 Inches Nominal
- Special Features [FEAT]
- 0.360 In Dia Thru Bore
- Overall Length [ABHP]
- 6.220 Inches Nominal
- Step Quantity [ATPC]
- 6
- Surface Finish [CSYM]
- 125.0 Microinches
Weapon Systems (WSDC) 3040-01-150-2020
DLA Procurement Analysis 3040-01-150-2020
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-150-2020
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JF
- F-101 ENGINE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3040-01-150-2020
Freight Information 3040-01-150-2020
3040-01-150-2020 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-150-2020 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-150-2020 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-150-2020 is not classified as a special type of cargo when transported by water. 3040-01-150-2020 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-150-2020 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: