Premium Information is available for this item - Upgrade for $1 a day
3040-01-149-7847
Shouldered Shaft
3040011497847 011497847 SS585-2477289 PIECE 98 SS585-2477289
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-149-7847
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-149-7847 5+ Documents (More...)
(Identification) 1/2 NSN 3040-01-149-7847 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 3040-01-149-7847 RQST NE Updated Every Day 3040-01-149-7847 RQST
Shouldered Shaft 3040011497848011497848 PIECE 103 SS585-2477289 A shaft having two or more different
linear A straight, hollow product, welded or seamless, of round, square, or any other PIECE 36 SS585-2477289
Shouldered Shaft 3040011497847 011497847 $1 a day Upgrade your Account Upgrade 3040-01-149-7847Shouldered
Shaft3040011497847 011497847 SS585-2477289 PIECE 98 SS585-2477289 A shaft having two or more different
PIECE 43 SS585-2477289 A straight, hollow product, welded or seamless, of round, square, or any other
PIECE 36 SS585-2477289 A straight, hollow product, welded or seamless, of round, square, or any other
Shouldered Shaft 3040011497847 011497847 PIECE 98 SS585-2477289 A shaft having two or more different
A straight, hollow product, welded or seamless, of round, square, or any other PIECE 36 SS585-2477289
Restrictions 3040-01-149-7847
3040-01-149-7847 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-149-7847
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-149-7847
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-01-149-7847
- Part Number
- Manufacturer
- Status
- SS585-2477289 PIECE 98
- Manufacturer
- 25685 - Naval Ship Engineering Center (Active)
- Primary Buy
- Primary Buy
- SS585-2477289
- 25685 - Naval Ship Engineering Center (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-149-7847
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3600 Inches Minimum And 0.3620 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Qq-N-286,Class A Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy K-500
- Largest Step Diameter [CSPY]
- 0.493 Inches Minimum And 0.495 Inches Maximum
- Second End Diameter [AMFZ]
- 0.4930 Inches Minimum And 0.4950 Inches Maximum
- Second End Hole Diameter [AMGS]
- 0.0980 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.250 Inches Nominal
- Second End Style [AAHP]
- Cross Drilled Hole And Slotted
- Second End Slot Depth [AMGR]
- 0.060 Inches Nominal
- Second End Slot Width [AKTN]
- 0.090 Inches Nominal
- Overall Length [ABHP]
- 9.440 Inches Nominal
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 32.0 Microinches
DLA Procurement Analysis 3040-01-149-7847
Management Data 3040-01-149-7847
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-149-7847
Freight Information 3040-01-149-7847
3040-01-149-7847 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-149-7847 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-149-7847 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-149-7847 is not classified as a special type of cargo when transported by water. 3040-01-149-7847 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-149-7847
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 5lb to 7.5lb, all dimensions less than 24"
- Above 110G
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-149-7847 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: