Premium Information is available for this item - Upgrade for $1 a day
3040-01-147-3203
Shouldered Shaft
3040011473203 011473203 SM-C-807467
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-147-3203
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-147-3203 3+ Documents (More...)
Shouldered Shaft 3040011473203 011473203 $1 a day Upgrade your Account Upgrade 3040-01-147-3203Shouldered
Shaft3040011473203 011473203 SM-C-807467 ZC01) Effective Date:1 May 2001 Approved Sources 3040-01-147
Restrictions 3040-01-147-3203
3040-01-147-3203 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-147-3203
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-147-3203
- US Army (A920)
- Effective Date:
- 1 Jan 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- BD
- Canada (ZC01)
- Effective Date:
- 1 May 2001
Approved Sources 3040-01-147-3203
- Part Number
- Manufacturer
- Status
- SM-C-807467
- Manufacturer
- 80063 - Us Army Communications & (Active)
- Primary Buy
- Primary Buy
- SM-C-807467
- 64609 - Banner Machine Company, Inc. (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- SM-C-807467
- 6M364 - Machine Products Co (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 3040-01-147-3203
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.6300 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.3800 Inches Nominal
- First End Groove Width [AAHG]
- 0.5000 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.150 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved
- Material [MATT]
- Steel Comp 17-4Ph
- Largest Step Diameter [CSPY]
- 0.040 Inches Nominal
- Material Document And Classification [MDCL]
- Ams5643 Assn Std Single Material Response
- Second End Diameter [AMFZ]
- 0.3760 Inches Nominal
- Second End Style [AAHP]
- Slotted
- Second End Slot Depth [AMGR]
- 0.3500 Inches Nominal
- Second End Slot Width [AKTN]
- 0.400 Inches Nominal
- Overall Length [ABHP]
- 0.420 Inches Nominal
- Step Quantity [ATPC]
- 2
Weapon Systems (WSDC) 3040-01-147-3203
DLA Procurement Analysis 3040-01-147-3203
Management Data 3040-01-147-3203
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3040-01-147-3203
Freight Information 3040-01-147-3203
3040-01-147-3203 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-147-3203 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-147-3203 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-147-3203 is not classified as a special type of cargo when transported by water. 3040-01-147-3203 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-147-3203
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-147-3203 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: