Premium Information is available for this item - Upgrade for $1 a day
3040-01-138-0290
Shouldered Shaft
3040011380290 011380290 520-4674711 ITEM 4
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-138-0290
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-138-0290 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-138-0290 RQST NE Updated Every Day 3040-01-138-0290 RQST
Updated Every Day 3040-01-138-0290 RQST NE Related Documents 3040-01-138-0290 5+ Documents ( More...
Shouldered Shaft 3040011380290 011380290 $1 a day Upgrade your Account Upgrade 3040-01-138-0290Shouldered
Shaft3040011380290 011380290 520-4674711 Gas Cylinder Charging Manifold 8120150086135 Shouldered Shaft
Shouldered Shaft 3040011380290 011380290 https//www.nsnlookup.com /fsg-31/fsc-3120/us https https
520-4674711 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-138-0290 Shouldered Shaft 3040011380290
011380290 for $1 a day Upgrade your Account Upgrade 3040-01-138-0290Shouldered Shaft3040011380290 011380290
/fsg-31/fsc-3120/us
Shouldered Shaft 3040011380290 011380290 4674711 https//www.nsnlookup.com /fsg-31/fsc-3120/us https
Restrictions 3040-01-138-0290
3040-01-138-0290 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-138-0290
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-138-0290
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-138-0290
- Part Number
- Manufacturer
- Status
- 520-4674711 ITEM 4
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-138-0290
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.5000 Inches Nominal
- First End Keyway Depth [AMDG]
- 0.207 Inches Minimum And 0.208 Inches Maximum
- First End Keyway Width [AMCZ]
- 0.3750 Inches Minimum And 0.3770 Inches Maximum
- First End Distance From Keyway Center To End [AMDH]
- 0.907 Inches Minimum And 0.912 Inches Maximum
- First End External Keyway Length [AMDE]
- 1.625 Inches Minimum And 1.635 Inches Maximum
- First End Style [AAGZ]
- Indented Flat Keyway
- Largest Step Diameter [CSPY]
- 1.250 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.875 Inches Nominal
- Second End Hole Depth [AMHD]
- 0.186 Inches Minimum And 0.190 Inches Maximum
- Second End Hole Diameter [AMGS]
- 0.2420 Inches Minimum And 0.2480 Inches Maximum
- Second End Diameter [AMFZ]
- 0.7000 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.292 Inches Minimum And 0.403 Inches Maximum
- Second End Style [AAHP]
- Cross Drilled And Externally Threaded
- Overall Length [ABHP]
- 35.220 Inches Nominal
- Step Quantity [ATPC]
- 4
- Surface Finish [CSYM]
- 125.0 Microinches
Weapon Systems (WSDC) 3040-01-138-0290
DLA Procurement Analysis 3040-01-138-0290
Management Data 3040-01-138-0290
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-138-0290
Freight Information 3040-01-138-0290
3040-01-138-0290 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-138-0290 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-138-0290 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-138-0290 is not classified as a special type of cargo when transported by water. 3040-01-138-0290 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-138-0290
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-DTL-17667, Neutral Wrapping Paper
- Weather Resistant Fiberboard Meeting the Requirements of ASTM-D4727 used as Pads, Cells, Die-cuts or Sleeves; or Plastic Molding Material conforming to MIL-P-19644; or Polyurethane Foam conforming to MIL-PRF-26514
- --
- ASTM-D5118, Type CF, Class Weather-Resistant, Double Wall, Corrugated Fiberboard Box
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-138-0290 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: