Premium Information is available for this item - Upgrade for $1 a day
3040-01-134-2508
Shouldered Shaft
3040011342508 011342508 70351-08131-045
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
9
Marketplace 3040-01-134-2508
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-134-2508 5+ Documents (More...)
RQST NE Updated Every Day 3040-01-134-2508 RQST Updated Every Day 3040-01-134-2508 RQST NE Related Documents
3040-01-134-2508 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-134-2508
70351-08131-045 having two or more different diameters (greater than -38131-042 70351- -08131-048 70351
-08131-044 70351-08131-045 Upgrade 3040-01 -415-8388Shouldered Shaft3040014158388 014158388 70351 -08131
Upgrade 3040-01-415-8388Shouldered Shaft3040014158388 014158388 70351 -08131-048 70351-08131-044 70351-08131-045
Shouldered Shaft 3040011342508 011342508 -044 70351-08131-045 Upgrade 3040-01-415-8388Shouldered
04870351-08131-04470351-08131-04570351-08131 A shaft having two or more different diameters -044 70351-08131-045
Shouldered Shaft 3040011342508 011342508 -045 having two or more different diameters (greater than
70351-08131 A shaft having two https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-134-2508 Shouldered
Shaft 3040011342508 011342508 -044 70351-08131-045 Upgrade 3040-01-415-8388Shouldered Shaft3040014158388
Restrictions 3040-01-134-2508
IUID Required
3040-01-134-2508 is a Shouldered Shaft that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Approved Sources 3040-01-134-2508
- Part Number
- Manufacturer
- Status
- 70351-08131-045
- Manufacturer
- 78286 - Sikorsky Aircraft Corporation (Active)
- Primary Buy
- Primary Buy
DLA Procurement Analysis 3040-01-134-2508
Management Data 3040-01-134-2508
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- May 2023
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- May 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Army (DA)
- A
- F
- When Exhausted Use 3040-01-415-8388
- F
- Defense Logistics Agency (DS)
- I
- Z
- Discontinued-Use 3040-01-415-8388
- Z
Army
- Materiel Category and Inventory Manager:
- H
- Aircraft, Air Materiel
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 1
- Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify serviceable or unserviceable items of a durable nature, which when unserviceable normally can be repaired economically by depots or lower echelons of maintenance.
- Weapons System / End Item / Homogeneous Group:
- BE
- Rotary Wing Aircraft
UH-60
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-01-134-2508
Contracting Technical Data File (CTDF) 3040-01-134-2508 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: