Premium Information is available for this item - Upgrade for $1 a day
3040-01-131-0269
Shouldered Shaft
3040011310269 011310269 87776-0107 ITEM 7 201-4684482 ITEM 7 201-4684482 87776-0107
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
5
Marketplace 3040-01-131-0269
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-131-0269 5+ Documents (More...)
having two or more different diameters Day 3040-01-131-0269 RQST NE Related Documents ITEM 13 201-4684482
ITEM21 ITEM3 ITEM9 87776-0107 ITEM21 ITEM3 ITEM9 201-4684482 ITEM 21 201-4684482 ITEM 21 AND 3 87776
ITEM 21 AND 3 87776-0107 ITEM 21 87776-0107 ITEM 21 AND 3 87776-0107 201-4684482 A flexible connection
Shouldered Shaft 3040011310269 011310269 ITEM 7 201-4684482 ITEM 7 201-468448287776-0107 A shaft
ITEM 8 87776-0107 ITEM 8 87776-0107 201-4684482 A straight shaft having two or more of the following
Shouldered Shaft 3040011310269 011310269 your Account Upgrade 3040-01-131-0269Shouldered Shaft3040011310269
ITEM 21 201-4684482 ITEM 21 AND 3 87776 ITEM 2 87776-0107 ITEM 2 /fsg-30/fsc-3010/us 3010-01-124-5401
ITEM21 ITEM3 ITEM9 87776-0107 ITEM21 ITEM3 ITEM9 201-4684482 ITEM 21 201-4684482 ITEM 21 AND 3 87776
/fsg-30/fsc-3040/us
Shouldered Shaft 3040011310269 011310269 ITEM 7 201-4684482 ITEM 7 201-468448287776-0107 A shaft
having two or more different diameters ITEM21 ITEM3 ITEM9 87776-0107 ITEM21 ITEM3 ITEM9 201-4684482
Restrictions 3040-01-131-0269
3040-01-131-0269 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-131-0269
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-131-0269
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
- Spain (YB01)
- Effective Date:
- 1 Jun 1999
Approved Sources 3040-01-131-0269
- Part Number
- Manufacturer
- Status
- 87776-0107 ITEM 7
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 201-4684482 ITEM 7
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 87776-0107 ITEM 7
- 62991 - Drw Mfg Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 201-4684482
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 87776-0107
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-131-0269
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3750 Inches Nominal
- First End External Thread Length [AMEA]
- 0.567 Inches Nominal
- First End Style [AAGZ]
- External Threaded
- Material Document And Classification [MDCL]
- Mil-B-24059 Mil Spec Single Material Response
- Material [MATT]
- Copper Alloy 632
- Largest Step Diameter [CSPY]
- 0.872 Inches Minimum And 0.874 Inches Maximum
- Second End Diameter [AMFZ]
- 0.8720 Inches Minimum And 0.8740 Inches Maximum
- Second End Step Length [CTBM]
- 0.375 Inches Nominal
- Second End Style [AAHP]
- Square (Round Corners)
- Second End Width Across Flats [ACMD]
- 0.625 Inches Nominal
- Overall Length [ABHP]
- 9.190 Inches Nominal
- Step Quantity [ATPC]
- 7
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-131-0269
DLA Procurement Analysis 3040-01-131-0269
- Last Stock Position:
- 4 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-131-0269
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-131-0269
Freight Information 3040-01-131-0269
3040-01-131-0269 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-131-0269 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-131-0269 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-131-0269 is not classified as a special type of cargo when transported by water. 3040-01-131-0269 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-131-0269
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- A-A-1051, Paperboard Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-131-0269 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: