Premium Information is available for this item - Upgrade for $1 a day
3040-01-127-5161
Shouldered Shaft
3040011275161 011275161 100603
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-127-5161
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-127-5161 5+ Documents (More...)
web browser . 2910-14-335-8923Sediment Strainer Element2910143358923 143358923 100603 -001 516-100603
A grouping of two or more physically 516-100603 -001516-100603 A grouping of two or more -001516-100603
-001 516-100603 A grouping of two or more physically connected or related electrical an/or electronic
-001 516-100603 Circuit Card Assembly 5998013142470013142470 Sediment Strainer Element 2910143358923
A grouping of two or more physically 516-100603 -001516-100603 A grouping of two or more -001516-100603
A grouping -001516-100603 A grouping of -001516-100603 A grouping of two or more related electrical
JavaScript in your web browser . 3110-21-904-2509Bearing Retaining Plate3110219042509 2190425093-100603
JavaScript in your web browser . 3110-21-904-2509Bearing Retaining Plate3110219042509 2190425093-100603
Sprocket Wheel 3020003092855 003092855 A grouping of two or more physically 516-100603 -001516-100603
A grouping -001516-100603 A grouping of -001516-100603 A grouping of two or more related web browser
Restrictions 3040-01-127-5161
3040-01-127-5161 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-127-5161
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-127-5161
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-01-127-5161
- Part Number
- Manufacturer
- Status
- 100603
- Manufacturer
- 0WE82 - American Turbo Systems Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-127-5161
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1860 Inches Minimum And 0.1870 Inches Maximum
- First End Distance From Hole Center To End [AMDZ]
- 1.528 Inches Minimum And 1.538 Inches Maximum
- First End Style [AAGZ]
- Threaded Cross Drilled (Thru Hole)
- Material [MATT]
- Steel Comp 304
- Largest Step Diameter [CSPY]
- 0.249 Inches Minimum And 0.250 Inches Maximum
- Second End Diameter [AMFZ]
- 0.2490 Inches Minimum And 0.2500 Inches Maximum
- Second End Distance From Hole Center To End [AMGT]
- 0.190 Inches Minimum And 0.250 Inches Maximum
- Second End Style [AAHP]
- Threaded Cross Drilled (Thru Hole)
- Overall Length [ABHP]
- 4.400 Inches Minimum And 4.420 Inches Maximum
- Special Features [FEAT]
- Thd Holes Are At 45 Deg Angle
- Step Quantity [ATPC]
- 2
DLA Procurement Analysis 3040-01-127-5161
Management Data 3040-01-127-5161
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3040-01-127-5161
Freight Information 3040-01-127-5161
3040-01-127-5161 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-127-5161 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-127-5161 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-127-5161 is not classified as a special type of cargo when transported by water. 3040-01-127-5161 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-127-5161
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 4, corrosion preventive, solvent cutback, cold application, transparent, non-tacky
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 3040-01-127-5161 1 Records
Contracting Technical Data File (CTDF) 3040-01-127-5161 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: