Premium Information is available for this item - Upgrade for $1 a day
3040-01-126-8922
Shouldered Shaft
3040011268922 011268922 87832-1638 ITEM 25 709-4684909 ITEM 25 87832-1638 ITEM25 709-4684909 87832-1638
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-126-8922
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-126-8922 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-126-8922 RQST NE Updated Every Day 3040-01-126-8922 RQST
ITEM 33 87832-1638709-4684909 A straight shaft having two or more of the following ITEM 25 87832-1638
for $1 a day Upgrade your Account Upgrade 3040-01-126-8922Shouldered Shaft3040011268922 011268922 87832
-1638 ITEM 25 709-4684909 ITEM 25 87832-1638 ITEM25 709-468490987832-1638 A shaft having two or more
/fsg-30/fsc-3040/us
/fsg-30/fsc-3040/us 3040-01-126-8922 Shouldered Shaft 3040011268922 011268922 for $1 a day Upgrade your
Account Upgrade 3040-01-126-8922Shouldered Shaft3040011268922 011268922 87832-1638 ITEM 25 709-4684909
ITEM 24 709-4684909 ITEM 24 709-468490987832-1638 A shaft having two or more different ITEM 25 709
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-126-8922 Shouldered Shaft 3040011268922 011268922
/fsg-31/fsc-3120/us
-3040/us 3040-01-126-9822 Straight Shaft 3040011269822 011269822 Bearing3120010693462 010693462 709-4684909
//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-126-5365 Straight Shaft 3040011265365 011265365 709-4684909
Restrictions 3040-01-126-8922
3040-01-126-8922 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-126-8922
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-126-8922
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-126-8922
- Part Number
- Manufacturer
- Status
- 87832-1638 ITEM 25
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 709-4684909 ITEM 25
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 87832-1638 ITEM25
- 62991 - Drw Mfg Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 709-4684909
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 87832-1638
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-126-8922
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.5000 Inches Nominal
- First End External Thread Length [AMEA]
- 0.650 Inches Nominal
- First End Style [AAGZ]
- External Threaded
- Material Document And Classification [MDCL]
- Qq-S-763,Cond A Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 304
- Largest Step Diameter [CSPY]
- 1.182 Inches Minimum And 1.183 Inches Maximum
- Overall Length [ABHP]
- 11.875 Inches Nominal
- Step Quantity [ATPC]
- 7
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-126-8922
DLA Procurement Analysis 3040-01-126-8922
Management Data 3040-01-126-8922
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-126-8922
Freight Information 3040-01-126-8922
3040-01-126-8922 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-126-8922 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-126-8922 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-126-8922 is not classified as a special type of cargo when transported by water. 3040-01-126-8922 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-126-8922
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-203, Kraft Wrapping Paper
- No Requirement
- Not Applicable
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- A-A-203, Kraft Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3040-01-126-8922 2 Records
Contracting Technical Data File (CTDF) 3040-01-126-8922 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: