Premium Information is available for this item - Upgrade for $1 a day
3040-01-123-3014
Shouldered Shaft
3040011233014 011233014 87615-2011 ITEM 3 520-4674729 ITEM 3 520-4674729 87615-2011
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-123-3014
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-123-3014 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-123-3014 RQST NE Updated Every Day 3040-01-123-3014 RQST
Shouldered Shaft 3040011233014 011233014 your Account Upgrade 3040-01-123-3014Shouldered Shaft3040011233014
ITEM 2 520-4674729 ITEM 2 520-4674729 87615-2011 A shaft having two or more different diameters
ITEM https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-123-3014 Shouldered Shaft 3040011233014 011233014
-2011 A shaft https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-123-3014 Shouldered Shaft 3040011233014
011233014 your Account Upgrade 3040-01-123-3014Shouldered Shaft3040011233014 011233014 87615-2011 ITEM
ITEM 2 520-467472987615-2011 A shaft having two or more different diameters ITEM 3 520-4674729 ITEM
ITEM 11 520-4674729 A flexible connection designed for vehicular applications -30/fsc-3040/us 3040-01
/fsg-30/fsc-3040/us
ITEM 12 87615-2011 ITEM 12 520-4674729 87615-2011 A straight shaft having two or more of the following
/fsg-30/fsc-3040/us 3040-01-123-3014 Shouldered Shaft 3040011233014 011233014 ITEM 3 520-4674729 ITEM
Restrictions 3040-01-123-3014
3040-01-123-3014 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-123-3014
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-123-3014
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-123-3014
- Part Number
- Manufacturer
- Status
- 87615-2011 ITEM 3
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 520-4674729 ITEM 3
- 80064 - Naval Ship Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 520-4674729
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 87615-2011
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-123-3014
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.9970 Inches Minimum And 0.9980 Inches Maximum
- First End Style [AAGZ]
- Splined (Straight)
- First End Spline Length [AMDM]
- 1.750 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.9970 Inches Minimum And 0.9980 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 0.8440 Inches Minimum And 0.8540 Inches Maximum
- First End Spline Quantity [BDSQ]
- 10
- Material Document And Classification [MDCL]
- Qq-N-281,Class A Fed Spec Single Material Response
- Material [MATT]
- Nickel Alloy
- Largest Step Diameter [CSPY]
- 1.625 Inches Nominal
- Second End Diameter [AMFZ]
- 1.6250 Inches Nominal
- Second End Step Length [CTBM]
- 1.120 Inches Nominal
- Second End Style [AAHP]
- Square (Round Corners)
- Second End Width Across Flats [ACMD]
- 1.000 Inches Nominal
- Overall Length [ABHP]
- 7.120 Inches Nominal
- Special Features [FEAT]
- Second End Bored,0.250 In. Dia,2.500 In. Dp,Tap 1/8 Nptf;Second End Counterbored,0.750 In. Dia,0.620 In. Dp
- Step Quantity [ATPC]
- 3
- Surface Finish [CSYM]
- 32.0 Microinches
Weapon Systems (WSDC) 3040-01-123-3014
DLA Procurement Analysis 3040-01-123-3014
Management Data 3040-01-123-3014
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-123-3014
Freight Information 3040-01-123-3014
3040-01-123-3014 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-123-3014 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-123-3014 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-123-3014 is not classified as a special type of cargo when transported by water. 3040-01-123-3014 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-123-3014
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-123-3014 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: