Premium Information is available for this item - Upgrade for $1 a day
3040-01-120-8285
Shouldered Shaft
3040011208285 011208285 87832-1604 ITEM 15 709-4684875 ITEM 15 709-4684875 87832-1604
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-120-8285
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-120-8285 5+ Documents (More...)
two or more ITEM 15 709-4684875 ITEM 15 709-468487587832-1604 A shaft having shaft having two or more
teeth on the outer surface parallel to the axis Shouldered Shaft 3040011208285011208285 ITEM 15 709-4684875
12 87832-1604 ITEM 12 709-468487587832-1604 A straight shaft having two or more ITEM 5 709-4684875 ITEM
-468487587832-1604 A straight shaft having two or more ITEM 15 709-4684875 ITEM 15 709-468487587832-1604
ITEM https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-120-8285 Shouldered Shaft 3040011208285 011208285
for $1 a day Upgrade your Account Upgrade 3040-01-120-8285Shouldered Shaft3040011208285 011208285 87832
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-120-8285 Shouldered Shaft 3040011208285 011208285
ITEM 15 709-4684875 ITEM 15 709-468487587832-1604 A shaft having two or more different diameters ITEM
011208285 87832-1604 ITEM 15 709-4684875 ITEM 15 709-4684875 87832-1604 A shaft having two or more different
diameters (greater than 0.031 inches ITEM 15 709 https//www.nsnlookup.com two or more ITEM 15 709-4684875
Restrictions 3040-01-120-8285
3040-01-120-8285 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-120-8285
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-120-8285
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-120-8285
- Part Number
- Manufacturer
- Status
- 87832-1604 ITEM 15
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 709-4684875 ITEM 15
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 709-4684875
- 53711 - Naval Sea Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 87832-1604
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-120-8285
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.9842 Inches Minimum And 0.9846 Inches Maximum
- First End Groove Diameter [AAHH]
- 0.9350 Inches Minimum And 0.9390 Inches Maximum
- First End Groove Width [AAHG]
- 0.0860 Inches Minimum And 0.0910 Inches Maximum
- First End Distance From End To Groove [AMCY]
- 0.090 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved
- Material Document And Classification [MDCL]
- Mil-S-1222,Type 1 Mil Spec Single Material Response
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 1.200 Inches Nominal
- Overall Length [ABHP]
- 6.500 Inches Nominal
- Step Quantity [ATPC]
- 4
- Surface Finish [CSYM]
- 32.0 Microinches
Weapon Systems (WSDC) 3040-01-120-8285
DLA Procurement Analysis 3040-01-120-8285
Management Data 3040-01-120-8285
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-120-8285
Freight Information 3040-01-120-8285
3040-01-120-8285 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-120-8285 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-120-8285 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-120-8285 is not classified as a special type of cargo when transported by water. 3040-01-120-8285 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-120-8285
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-120-8285 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: